03 Street Build
#1
03 Street Build
Going to post to revive some forum traffic because I miss it.
Owned my 03 track edition for about 11 years now, and am just wrapping up the final stages of a build I started 16 months ago. It's still on a break in tune, but got it out for some photos the other day. Dyno tuning is at Z1 on 8 April.
Build details:
Boostline Rods
Wiseco 11:1 pistons
Upgraded wrist pins
Bored .020 over
King Bearings
Tomei Cams (272/10.5)
Tomei Springs
ID 1050x
Walbro 450
CJM stage 1 return
Z1 poly motor mounts
Z1 poly trans mount
Z1 subframe collars
Momentum Single turbo kit
G35-900 turbo w/T51R mod
Momentum Headers
Greddy RS Race exhaust
Exedy Cerametallic twin disc
CD009
Z1 Built differential w/street pro 1.5way
DSS 370Z axles
Chargespeed type 1 front bumper
Voltex skirts
Voltex diffuser
Stardast carbon duckbill
Innovate Motorsports gauges
HKS EVC VII Boost controller
Nismo Clubsport CR57 (19x10.5 +22 square)
HKS Hipermax IV SP Coilovers
Hotchkis Sways
SPL control arms throughout
Think that's the majority of it. It's been fun to bring a vision together of what I felt like an "ultimate" street version of the 350Z should be. With the platform being as old as it is, it's been nice to learn from all the information out there, take advantage of newer technology, and bring it all together to create an awesome experience on the road.
Definitely not going for any records, but goals are somewhere between 500whp and 650whp depending on wastegate, low boost, and high boost maps.
Cheers all!
Happy to answer any questions and my social media is in the sig.
Owned my 03 track edition for about 11 years now, and am just wrapping up the final stages of a build I started 16 months ago. It's still on a break in tune, but got it out for some photos the other day. Dyno tuning is at Z1 on 8 April.
Build details:
Boostline Rods
Wiseco 11:1 pistons
Upgraded wrist pins
Bored .020 over
King Bearings
Tomei Cams (272/10.5)
Tomei Springs
ID 1050x
Walbro 450
CJM stage 1 return
Z1 poly motor mounts
Z1 poly trans mount
Z1 subframe collars
Momentum Single turbo kit
G35-900 turbo w/T51R mod
Momentum Headers
Greddy RS Race exhaust
Exedy Cerametallic twin disc
CD009
Z1 Built differential w/street pro 1.5way
DSS 370Z axles
Chargespeed type 1 front bumper
Voltex skirts
Voltex diffuser
Stardast carbon duckbill
Innovate Motorsports gauges
HKS EVC VII Boost controller
Nismo Clubsport CR57 (19x10.5 +22 square)
HKS Hipermax IV SP Coilovers
Hotchkis Sways
SPL control arms throughout
Think that's the majority of it. It's been fun to bring a vision together of what I felt like an "ultimate" street version of the 350Z should be. With the platform being as old as it is, it's been nice to learn from all the information out there, take advantage of newer technology, and bring it all together to create an awesome experience on the road.
Definitely not going for any records, but goals are somewhere between 500whp and 650whp depending on wastegate, low boost, and high boost maps.
Cheers all!
Happy to answer any questions and my social media is in the sig.
The following 10 users liked this post by RENFRO:
blax 350 (02-21-2022),
channing2294 (01-12-2024),
DarkZ03 (02-21-2022),
eman39 (02-26-2022),
MicVelo (03-31-2022),
and 5 others liked this post.
#2
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Nice work, subbed.
Good luck with the tune and car, tell Jon I said "Hi!", he's the best around. Just make sure he explains your maps...
Good luck with the tune and car, tell Jon I said "Hi!", he's the best around. Just make sure he explains your maps...
The following users liked this post:
jhc (02-23-2022)
#4
General & Tech Moderator
MY350Z.COM
MY350Z.COM
You'll love the new facility, the waiting area overlooks the Dyno area so you can watch the progress! The parking lot is the same so you can do a few laps/pulls before actually getting out on the street. Post up your results!
#6
New Member
Damn, that car is a beauty! Looks like a sweet built, best of luck at Z1!
#7
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
First time seeing this thread as I stayed away for a bit but this makes it worth coming back. Saw the first pic.... "Oooooo... CR57 Nismos". Car is looking suhweeeet! Sub'd for post tune results!
EDIT: Ohhhhhhhhhhhhh..... you're "Vitamin Z" on YouTube. I was watching a vid on the Coolerworx shifter install & op and thought, "OK, this is a good reference, well done vid, not the usual putz out there playing expert mechanic for social views." [Bookmark] And I'm hard to please.
EDIT: Ohhhhhhhhhhhhh..... you're "Vitamin Z" on YouTube. I was watching a vid on the Coolerworx shifter install & op and thought, "OK, this is a good reference, well done vid, not the usual putz out there playing expert mechanic for social views." [Bookmark] And I'm hard to please.
Last edited by MicVelo; 04-01-2022 at 08:12 PM.
Trending Topics
#8
haha, awesome! I have been slacking on my youtube content, but plan to finally get an update out there this week before I head down to Z1. As you can imagine, I was chasing all sorts of minor little issues for weeks and just didn't make for any decent content
#9
Here's the results! Things went really well. Only a few small things that I anticipated. We think the recirc pipe on the kit is keeping it from holding boost to redline. It will peak around 15psi but trail down to 13psi. Eventually will swap to an open dump to resolve later on. Also running a filter on the turbo and running the smaller intercooler that came with the kit. Overall, super pleased! Car made 536 on pump gas and 607 with boostane.
The following 5 users liked this post by RENFRO:
eman39 (04-12-2022),
OldManZ350 (04-21-2022),
PeterPotatoes (04-11-2022),
rustyschopshop (04-11-2022),
Timboj (06-27-2022)
#12
It's much easier to run high compression on boosted applications these days with better tuning options. Low compression still gives some margin for detonation concerns, but for the power goals I had it's nice to have the higher compression for when I'm out of boost. Overall, car drives like a normal NA car when out of boost which is tough to get on a lower compression motor.
The following users liked this post:
DarkZ03 (02-08-2023)
#15
haha thanks, yea all thats left is to build my engine and up boost, plus small things here and there like electronic boost controller and slicks in the rear.
yea its an aggressive street car/daily right now but eventually it will be mainly drag. I really want to hit 10s, maybe even sub 10 if im lucky and crazy enough to go that far.
I followed you on ig, go checkout my build
yea its an aggressive street car/daily right now but eventually it will be mainly drag. I really want to hit 10s, maybe even sub 10 if im lucky and crazy enough to go that far.
I followed you on ig, go checkout my build
#16
Update: Jumped up to ID1300 injectors and tuned on E85. Did 666whp on Friday the 13th in October LOL. Really liking the jump to E85. Need to hook up the map expansion wiring for the HKS EVC and could probably hit 700+. Plenty happy with where she is now though!
The following 4 users liked this post by RENFRO:
The following users liked this post:
BigBlue (01-25-2024)
#19
666whp - love it! A true devil Z.
Been following your build pretty much since the beginning, and it's one of my favorites. Just clean, tastefully modded, and now fast to boot.
Been following your build pretty much since the beginning, and it's one of my favorites. Just clean, tastefully modded, and now fast to boot.