Thanks to alot of people that have helped get this thing in full swing quick. Assaultech.com , Chasebaysonline.com, DGR Suspension, Spec Clutches, Sikky.com, Dustin@Strafe CJ-Motorsports.com, FTP Performance, Computechracing.com, tick-performance.com, if i forgot anyone else ill add them later.


Strafe Trunk
this is the way the car sat before the teardown
http://importalabama.com/articles/ca...g35-sedan.html
Motor
Assaultech.com,FTP Performance, Sikky.com
LQ9
Custom cam
Supporting valve train for cam
Fast 102MM intake manifold and throttle body
Sikky 7/8 headers with 3.5 inch collectors
Sikky Swap kit G35/350Z

Trans
Tick-performance.com

Bronze 1-4 Fork Pads
OEM 5-6 & Reverse Fork Pads
Billet 3-4 Synchronizer Keys (with upgraded springs)
New OEM 1-2, 5-6 & Reverse Keys & Springs
Carbon Fiber Synchronizer (blocker) Rings
Steel 3-4 Shift Fork
New 1-2 Synchronizer Assembly
New 3-4 Synchronizer Assembly
New Front Seal
New Rear Seal
Viper Style 2nd Gear
Spec 3+ clutch, Flywheel, and Throwout Bearing

Wiring/Fuel
Chasebaysonline.com, CJ-Motorsports

Chasebays Mil Spec LSX Harness
Chasebays Custom fuel return
CJ-Motorsports Fuel Correction kit
255 lph fuel pump
Chasebays LSX power steering kit
Computech.com Datamaxx logger LCD dash with all sensors needed



SIKKY Swap kit


SIKKY SWAP KIT





LQ9 from LKQ


wire tuck


More wire tuck


Getting Ready for datamaxx logger LCD dash


Tear down of stock cluster


Volk SF Challanges i picked up from Cliff aka DZ n.u.t.z


Chasebays MIL Spec LSX harness





*UPDATED PICS 3/31/11*

Sikky 7/8 headers with 3.5 inch collectors


3.5 inch collector on the Sikky 7/8 headers


ARP head studs and 255lph


DGR coilovers thanks Russ!!!! and Assaultech.com


32 way adjustable DGR coilovers


More pics of the DGR coilovers

super dumped getting the right coilovers are on the way thanks to DGR.


Computech like what!







102mm of F.A.S.T goodies


04 Z OH6 MAF



Buddyclub Low down rails to pair with a status racing seat :O seat should get here tomorrow or friday










Spec 3+ with Aluminum Flywheel, and Spec throwout bearing, off with the spec stock stuff and on with the Sikky quick bleeder and line adapter.


T 50 SEX Stage 2 built from www.tick-performance.com










http://www.youtube.com/watch?v=E2W9t...layer_embedded
First start up VID untuned

http://www.youtube.com/watch?v=puJz9CKfSu0

More untuned footage

http://www.youtube.com/watch?v=ODlB_9HuLjQ

First magnaflow exhaust



http://www.youtube.com/watch?v=-NV6AAumjG8


http://www.youtube.com/watch?v=NWhaR7oxtjI

http://www.youtube.com/watch?v=IyngWy2unaI
New Exhaust videos for you to enjoy ill have some more this after noon in the light. This is still a 3.5 inch exhaust with a Vibrant resonator, and Spin Tech 6000 Pro Street Series muffler. ENJOY!!

Here are some updated shitty iphone 4s pics i took of how the car sits and some of my fav new additions that i love.












Old shifter



New shifter



If you look at the old shifter they have added some brash washers. As Quamen mentioned earlier they had some major play and I'm hoping this will solve that problem.



They have also added brass washers here as well to make up for the play. I hope to get this and my new Mil-Spec harness thrown on tonight and will keep those with the sikky kit updated.




My old harness loomed in the Nylon braided loom- Does not come with a Cannon plug disconnect - What we call a CM1 harness. Goes directly from the motor to the ECU like stock

The Mil-spec harness comes loomed in the Raychem DR25 high heat and diesel fuel resistant heat shrink and individual sensor labeling. It will also come with the Mil-Spec cannon plug quick disconnect

The original harness was only used for mock up and testing. No sense in using the expensive loom ad cannon plug for mocking up and testing



here is a picture of the individual sensor labeling



here is a quick picture i snapped with the iphone while we were taking better pictures with the sweet nikon d5100

http://www.youtube.com/watch?v=5nZD4Pw2wa8

This was open header ^^^^^

http://www.youtube.com/watch?v=CIZn0XUU_ng

Sorry for the crappy Iphone 4 pics I hope chase from Chasebays or Danny from assaultech will bring one of their nice camera so we can get some better pics for you guys.


I will have more pics up daily alot of parts are still coming in.
Coilovers, Sikky headers, Intake manifold and throttle body come tomorrow when chase from Chasebays comes to measure out some things for fuel and AC lines. Trans is expected to be in on the 8th and Motor is at FTP Performance getting all the goods installed.

If you have any questions let me know

Thanks,
Logan

 

wow logan i must say YOU WIN. Please share some of your lottery winnings with me

 

No lottery winnings here.

If you have any questions or need anything else let me know.
Thanks,
-Logan
logan@assaultech.com
(205)588-0960
www.assaultech.com

Add Us on Facebook
facebook.com/assaultech

 

uhh same person?

 

Yea i just used my personal account, me and Dan both use this name for Assaultech.

 

that would explain all those stickers& shirts. Holy crap thats alot of work/parts, suscribed for the progress

 

thats sick. i love the trunk

 

I hate you with the essence of my very soul.




God I want to do this so bad. I wonder how much I can get for a kidney?

 

Some older pics of the car kept the same lip skirts and front bumper just new volk Sf challenges.

 

Sickness.....

 

Wow man sweet work

 

There are few things I'm truly jealous of.

This would be one of them.

 

Just a couple of things that need to be worked out.
Wiring harness will be done first of next week.
Ordered a Corvette power steering pump (it comes with hose fitting so that the Power Steering reservoir can work) Camaro ones come with out a fitting so that the reservoir can be mounted on top.
Getting the right throttle cable the 98-00 are a inch shorter than the 01-02 fbody.
Waiting on the 240 gas pedal to come in
Waiting on CJM to send the right fuel return correction kit they sent me a 350z/g35 coupe. (sedan is totally different)

Thanks for the comments. If you have any questions on any of the parts or the swap let me know.
Thanks,
-Logan
logan@assaultech.com
(205)588-0960
www.assaultech.com

Add Us on Facebook
facebook.com/assaultech

 

Siiiiiiiiick!

 

awesome, I want some video

 

Sick!! Sick!! The LS swap disease is HERE!!! Vids now or ban!

 

Hahaha everything is ready to go just waiting on the wiring harness im just as ready as everyone else is

 

Nice wish Infinity would just throw in a bad *** V8 in that car.

 

There was a hold up on the wiring harness cross your fingers hope to have this ***** wired and fired tonight

 

if for finished pix/vids