AAM SPEC Angled Plenum Spacer !Group Buy!
03-04-2005, 08:38 AM
#264
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: Alexandria, VA
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jeffw
I got mine, but I was not emailed a tracking #.
--
Jeff
I got mine, but I was not emailed a tracking #.
--
Jeff
03-04-2005, 03:18 PM
#266
Registered User
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Before submitting a group buy these guys should ship out valium suppositories to the buyers to prevent this "when do I get mine whendo I get mine" craze
Everyone needs to calm down and realize that the stuff will get there when it gets there.
The bitching and moaning will only slow down the process!
Everyone needs to calm down and realize that the stuff will get there when it gets there.
The bitching and moaning will only slow down the process!
03-04-2005, 03:23 PM
#267
Originally posted by joust75
Before submitting a group buy these guys should ship out valium suppositories to the buyers to prevent this "when do I get mine whendo I get mine" craze
Everyone needs to calm down and realize that the stuff will get there when it gets there.
The bitching and moaning will only slow down the process!
Before submitting a group buy these guys should ship out valium suppositories to the buyers to prevent this "when do I get mine whendo I get mine" craze
Everyone needs to calm down and realize that the stuff will get there when it gets there.
The bitching and moaning will only slow down the process!
MMMMWHHHHAAAAAAAA.....MMMWHAAAHAAAAAA!!
03-04-2005, 05:28 PM
#268
Registered User
iTrader: (6)
Join Date: Jun 2002
Location: Torrance
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
that's the most peanuts packed in the box i ever saw, great packaging. I'll be installing tonight too, let you know how the butt dyno feels if it stops raining here.
03-05-2005, 11:09 AM
#273
Registered User
iTrader: (2)
Join Date: Nov 2002
Location: Va Beach
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
Plenum Spacer Installed...
I installed my AAM plenum spacer today. Here are my thoughts.
Installation: First, the spacer is a thing of beauty. I love stuff that's done on a CNC machine. The instructions work as written (but the bolt size and qty. in the parts list is incorrect.)
I did, however, have to go out and buy quite a few more bolts because the stock bolts were not long enough. The kit came with six M6x30mm, but I found that I had to replace the back three center bolts (M6x60mm) with three M6x70mm. I could have used those 60mm bolts in the front three center holes, but wanted the heads to match, so I purchased an additional three M6x60mm too. I also had to purchase five M6x35mm bolts for the front-most connection points, since even the ones included in the kit were not long enough.
performance:It's too rainy here today to get on this thing and see what the butt dyno says. I did what I promised earlier, however. I went to my local DynoJet this morning before the install and got two pulls. I did two more pulls after the install. I also tested this mod with my G-Tech before and after. Here are the results of the two types of tests. Each display includes a pair of baseline runs from when the car was stock, then a pair this morning before the install, and finally a pair after installing the plenum spacer.
On the Dyno
What the G-Tech says
before you go asking all typical G-tech questions, yes it always shows lower net HP because of the aero drag of a moving vehicle.
So basically, the SAE corrected DyoJet says I gain approx. 5WHP and flatten my torque curve a bit. The G-Tech claims more like 9WHP, which after correcting for drag is more like 11-12WHP. I won't argue the difference in the tests in this thread, but I'll assume that the truth lies somewhere in the middle.
Am I happy with this mod. Yes, given the HP/$ ratio, it's not bad. I believe (and my data backs me up) that I really need an ECU reflash next to take advantage of the intake & exhausts mods I've got.
Would I recommend this mod? I'll have to say "It Depends" and leave it at that.
Installation: First, the spacer is a thing of beauty. I love stuff that's done on a CNC machine. The instructions work as written (but the bolt size and qty. in the parts list is incorrect.)
I did, however, have to go out and buy quite a few more bolts because the stock bolts were not long enough. The kit came with six M6x30mm, but I found that I had to replace the back three center bolts (M6x60mm) with three M6x70mm. I could have used those 60mm bolts in the front three center holes, but wanted the heads to match, so I purchased an additional three M6x60mm too. I also had to purchase five M6x35mm bolts for the front-most connection points, since even the ones included in the kit were not long enough.
performance:It's too rainy here today to get on this thing and see what the butt dyno says. I did what I promised earlier, however. I went to my local DynoJet this morning before the install and got two pulls. I did two more pulls after the install. I also tested this mod with my G-Tech before and after. Here are the results of the two types of tests. Each display includes a pair of baseline runs from when the car was stock, then a pair this morning before the install, and finally a pair after installing the plenum spacer.
On the Dyno
What the G-Tech says
before you go asking all typical G-tech questions, yes it always shows lower net HP because of the aero drag of a moving vehicle.
So basically, the SAE corrected DyoJet says I gain approx. 5WHP and flatten my torque curve a bit. The G-Tech claims more like 9WHP, which after correcting for drag is more like 11-12WHP. I won't argue the difference in the tests in this thread, but I'll assume that the truth lies somewhere in the middle.
Am I happy with this mod. Yes, given the HP/$ ratio, it's not bad. I believe (and my data backs me up) that I really need an ECU reflash next to take advantage of the intake & exhausts mods I've got.
Would I recommend this mod? I'll have to say "It Depends" and leave it at that.
03-05-2005, 12:08 PM
#275
Registered User
iTrader: (1)
Join Date: Sep 2003
Location: Montreal, Canada
Posts: 1,035
Likes: 0
Received 0 Likes
on
0 Posts
what are your other mods roark?
definitately will blow the 250whp mark with a reflash.
maybe the spacer needs to settle a little. Should have waited a couple of days for ECU to adapt before dynoeing. Good results nonetheless.
definitately will blow the 250whp mark with a reflash.
maybe the spacer needs to settle a little. Should have waited a couple of days for ECU to adapt before dynoeing. Good results nonetheless.
03-05-2005, 12:11 PM
#276
Registered User
Join Date: Apr 2003
Location: MD
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
I got my kit yesterday, and as the same problem as roark, the proper bolts were not provided. For anyone who hasn't installed it yet, I highly recommend getting the bolts that roark stated above before you install. I found this out the hard way. I never removed my upper plenum before so I didn't know about the different sized bolts. Plus the instructions didn't state to use M6x70mm for the upper 3 center bolts. But no biggie, I'll just run to Home Depot and pick up the right bolts.
03-05-2005, 06:36 PM
#277
Registered User
iTrader: (8)
Join Date: Jul 2004
Location: Houston, TX
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
I plan on purchasing one of these in the future, hopefully they have the bolt situation corrected by then.
Thanks for the dyno chart, looks like a good mod!
Looking at it in person do you actually feel it distributes the air better across the cylinders? I'm more interested in this for my FI application, preventing the 5&6 cylinder lean condition...
Thanks for the dyno chart, looks like a good mod!
Looking at it in person do you actually feel it distributes the air better across the cylinders? I'm more interested in this for my FI application, preventing the 5&6 cylinder lean condition...
03-05-2005, 06:37 PM
#278
Registered User
iTrader: (1)
Join Date: Apr 2003
Location: NoVA
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
AAM Spacer
Notwithstanding AAM's indication that there would be no fitment issues for 03 models, I had the same bolt issue as the above posters. I went to Home Depot and Lowes and an auto parts shop and could not find the M6x70 bolts. AAM - please send these bolts out to all of those that have already received (and picked-up) the spacer with the inapporiate bolts.
03-05-2005, 07:56 PM
#279
Registered User
Join Date: Dec 2004
Location: ny
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
my kit includes the plenum spacer the gasket m10*1*30mm bolts*{4} washers with intergrated o rings *6and 24 spacers the only reason iam posting this cause i seem the guy who posted before me had a diff list
03-05-2005, 09:11 PM
#280
Registered User
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by nuni
my kit includes the plenum spacer the gasket m10*1*30mm bolts*{4} washers with intergrated o rings *6and 24 spacers the only reason iam posting this cause i seem the guy who posted before me had a diff list
my kit includes the plenum spacer the gasket m10*1*30mm bolts*{4} washers with intergrated o rings *6and 24 spacers the only reason iam posting this cause i seem the guy who posted before me had a diff list
Punctuation is your friend nuni. Use it and prosper.....