Invidia Exhaust GREAT PRICE
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Fairfield CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Invidia Exhaust GREAT PRICE
Here is the deal, I just found out about this from my dristributor but I am not sure on our stock. Once I find that out on monday I will let you know if I can ship out ASAP or when I will be able to ship out. Here is a nice read up for you.
"The result is more power from the drop of the hammer to redline. There is nearly a 10-hp bump between 6100 and 6200 rpm, with peak output checking in at 8.2 hp. On the torque side, a peak gain of 5.1 lb-ft was realized. Invidia has illustrated that while it may be harder to make power, the payoff is still worth the effort. Working from a 237.4-whp baseline, Invidia technicians sampled different resonators and canisters before coming up with the winning combination that pushed output to 245.6 --an 8.2-whp bump. Torque was up from a 233.5 lb-ft baseline to 238.6. It should be noted the engine was equipped with an Injen intake during baseline and exhaust testing.
Style Dual
Material Stainless Steel
Tip Diameter 101mm
Power 245.6 whp
Torque 238.6 lb-ft
CARB Pending
MSRP $849
As you see MSRP is $849 but I will be letting them go for $800 SHIPPED to your door. that is more than 70 dollars off a newly introduced exhaust system.
Here are some pictures for the picture people.
"The result is more power from the drop of the hammer to redline. There is nearly a 10-hp bump between 6100 and 6200 rpm, with peak output checking in at 8.2 hp. On the torque side, a peak gain of 5.1 lb-ft was realized. Invidia has illustrated that while it may be harder to make power, the payoff is still worth the effort. Working from a 237.4-whp baseline, Invidia technicians sampled different resonators and canisters before coming up with the winning combination that pushed output to 245.6 --an 8.2-whp bump. Torque was up from a 233.5 lb-ft baseline to 238.6. It should be noted the engine was equipped with an Injen intake during baseline and exhaust testing.
Style Dual
Material Stainless Steel
Tip Diameter 101mm
Power 245.6 whp
Torque 238.6 lb-ft
CARB Pending
MSRP $849
As you see MSRP is $849 but I will be letting them go for $800 SHIPPED to your door. that is more than 70 dollars off a newly introduced exhaust system.
Here are some pictures for the picture people.
Last edited by 1320AutoSports; 06-20-2003 at 09:25 PM.
#2
Registered User
Thread Starter
Join Date: May 2003
Location: Fairfield CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Also,
If I can get 3 or more orders I will lower the price $30, so it will come to $770 SHIPPED. I will start a GB thread once I find out on stock.
If I can get 3 or more orders I will lower the price $30, so it will come to $770 SHIPPED. I will start a GB thread once I find out on stock.
#4
Registered User
Thread Starter
Join Date: May 2003
Location: Fairfield CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by wu350Z
i might be interested
i might be interested
#5
Sponsor
Forged Internals.com
Forged Internals.com
Originally posted by 1320AutoSports
Might? Look at the non angle setup, that is one thing I wish that the Injen SES did do, plus the dyno number say all. If I had a 350z these would be on my car already.
Might? Look at the non angle setup, that is one thing I wish that the Injen SES did do, plus the dyno number say all. If I had a 350z these would be on my car already.
#6
Banned
Join Date: Aug 2002
Location: Northern Virginia
Posts: 1,814
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Nissan350ZTT
That sounds a little pushy, think before you post. And Injen sells non-angled tips, just no one has got them yet. Also the Invidia system is only making about 8RWHP, the Injen is making an avg. of 13-15RWHP.
That sounds a little pushy, think before you post. And Injen sells non-angled tips, just no one has got them yet. Also the Invidia system is only making about 8RWHP, the Injen is making an avg. of 13-15RWHP.
The only thing I didn't really like about this exhaust is from behind you can see the piping a little.
#7
Sponsor
Forged Internals.com
Forged Internals.com
Originally posted by Ricky
Injen doesn't make non-angle tips.. I asked 2 dealers if they had them in a non-angle'd tips version and they said no. The reason Injen has gotten so much more power was due to the style of the piping, no 90º degree turns in the piping, allowing a more free flow of exhausts. If you did change the angle of the tips it would decrease the power.
The only thing I didn't really like about this exhaust is from behind you can see the piping a little.
Injen doesn't make non-angle tips.. I asked 2 dealers if they had them in a non-angle'd tips version and they said no. The reason Injen has gotten so much more power was due to the style of the piping, no 90º degree turns in the piping, allowing a more free flow of exhausts. If you did change the angle of the tips it would decrease the power.
The only thing I didn't really like about this exhaust is from behind you can see the piping a little.
Trending Topics
#9
Sponsor
Forged Internals.com
Forged Internals.com
Originally posted by Alberto
Looks nice, but I'd like to hear it before seriously considering to purchase....
Looks nice, but I'd like to hear it before seriously considering to purchase....
#10
Charter Member #50
iTrader: (3)
Join Date: May 2002
Location: Houston, Texas
Posts: 3,552
Likes: 0
Received 0 Likes
on
0 Posts
The mufflers and rear piping looks low.. also what's up with the Invidia plate between the rear pipes? what a way to advertise the muffler... any performance gain from that plate?
#11
Sponsor
Forged Internals.com
Forged Internals.com
Originally posted by Apexi350z
The mufflers and rear piping looks low.. also what's up with the Invidia plate between the rear pipes? what a way to advertise the muffler... any performance gain from that plate?
The mufflers and rear piping looks low.. also what's up with the Invidia plate between the rear pipes? what a way to advertise the muffler... any performance gain from that plate?
#12
Registered User
Thread Starter
Join Date: May 2003
Location: Fairfield CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Nissan350ZTT
That sounds a little pushy, think before you post. And Injen sells non-angled tips, just no one has got them yet. Also the Invidia system is only making about 8RWHP, the Injen is making an avg. of 13-15RWHP.
That sounds a little pushy, think before you post. And Injen sells non-angled tips, just no one has got them yet. Also the Invidia system is only making about 8RWHP, the Injen is making an avg. of 13-15RWHP.
Again I do read that and did come off a little pushy, guess my anxiety got the best of me
#13
Sponsor
Forged Internals.com
Forged Internals.com
Originally posted by 1320AutoSports
I appologize if I sounded pushy, I am just excited that there is a great priced system out there that may help lower prices on all other competitive exhaust systems.
Again I do read that and did come off a little pushy, guess my anxiety got the best of me
I appologize if I sounded pushy, I am just excited that there is a great priced system out there that may help lower prices on all other competitive exhaust systems.
Again I do read that and did come off a little pushy, guess my anxiety got the best of me
#14
Registered User
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
The price sounds a little high. Why?
1. It is not a true dual exhaust.
2. The Borla true dual is available for cheaper than that!
Also that assymetrical pipe setup is weird to me.
1. It is not a true dual exhaust.
2. The Borla true dual is available for cheaper than that!
Also that assymetrical pipe setup is weird to me.
#17
Registered User
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Nissan350ZTT
The Borla quality is cheap...
The Borla quality is cheap...
No. It is made with a high quality stainless steel. I own one. I should know.
Maybe you think its cheap because its not polished. I could care less if it isnt. I think its kind of a waste to polish parts that wont be washed and cant be seen anyway. The tips are polished and thats all I care about.
Even if it is cheap, as you say it is, then its not my problem. Or anyone else who owns ones problem. Borla has a lifetime guarantee on their products.(aka million mile warranty) They stand behind it too. There customer service is second to none. I wouldnt back them up if I couldnt speak from experience. They have been super nice to me, especially in my dealing with them to exchange my single for the dual.
Other than a few who werent happy with the Borla sound, yours is the only negative attitude I have heard.
So whats your story?
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM