I just bought an Injen true dual from a member on here, and I only received the 4 pipes. I went to install the exhaust and realized that there are only about half the hangers I need already on the car. Where can I get some hangers, or what can I do to get this done? What have other members here done on these installations?

 

anyone? I want some quick answers before it gets too dark..

 

Bend some cloths hangers?

 

Thats a little ghetto for my taste..

 

All the hangers that I need are on the car.

 

well wtf.. lol
looking at the picture the right side of my car does not have the hanger in which you have.. the stock exhaust just had one on the left side for the midpipe.. not one on the right.

 

Look harder you sould have all the nec hangers on your car, unless you might be the 2nd owner, or you have changed out the exhaust in the past.

 

Beleive me I have looked, its not rocket science lol. I am the 2nd owner but knowing the previous owner before me I would doubt the exhaust was changed. I might have to just have a shop install it or something..

 

Look on the very back corners both right and left, there should be 1 on each corner, did you check for hangers on the old exhaust when you removed from your Z? Worst case you can probably get some at muffler shop in your area.

 

I looked everywhere, I did not take my stock off yet, I am planning on just having a shop install it and buy a couple of the hangers there. There are some at the very end next to the tips, but if you look at this picture that David posted his two midpipes have hangers, mine only has a hanger on one side from the stock midpipe.

 

you can get hangers off ebay or any local autoparts store. I got my injen when they 1st came out and it didnt have the metal bracket to connect the 2 resonators, I should call injen to see if they can send me one.

Your car should have all the hangers. The injen uses all the stock mounting points.