2003 Nissan 350z
Mileage: 8000
Gear: 5th (1:1)
Mods: Nismo Exhaust, JWT Pop Charger, Ground-wiring Kit
47 degrees 75% humidity
-------------------------------------------------------
Pull #1:
Max HP: 245.98 @ 6300 RPM Max Torque: 239.01 @ 4700 RPM
Pull #2:
Max HP: 248.76 @ 6100 RPM Max Torque: 243.00 @ 4600 RPM
Pull #3:
Max HP: 251.48 @ 6000 RPM Max Torque: 242.89 @ 4500 RPM
-------------------------------------------------------

 

Nice. It's a 6M, right?

 

Yeah 6 speed manual.. also those numbers are with SAE correction and all that, forget to mention that part, and smoothing of 5 (not that it matters for pure numbers but in case your looking at the lines on the dyno, they aren't as 'smooth' without smoothing factor heh)

 

Nice numbers. What was your baseline (before mods)?

 

Unfortunately this is my baseline.. (I'm adding kinetix cats/plenum whenever they arrive, and maybe UR crank pulley)

If you go to dynoperformance.com and search for Nissan you'll see 2 350z's on there, both stock, both 8000ish miles on them. One dyno'd at 229, the other 240.. those dyno's and my dyno's all done on a dynojet 248h machine..

I couldn't get it dyno'd much earlier because my car only has 8000 miles on it. If I got it dyno'd at 2500 miles before the exhaust was put on, I wouldn't be sure if it was the mods or the 5500 extra miles put on the car since then, but I definately wanted to get one before the Kinetix package. They say on their website dyno proven "17whp at peak gain" (I'm guessing on a stock car) so I'm trying to see what kind of gain I will get and figured other people might be interested too since many people have pop charger/exhaust combos. If I hit 260whp with the kinetix cats/plenum/nismo exhaust/jwt pop I'll be happy.

 

Hottness, just wanna see it in motion at Atco.

 

This is a very strong car....nice! And only with an exhuast and air-filter.

 

Nice numbers.

Isn't hp & tq supposed to intersect at 5252 rpms? It looks like they intersect under 5000.

 

Probably is, what happens is when you choose say HP to display, it displays correctly, then when you want TQ to display, the numbers looked off so I had to adjust where the line was, heres the program and the dyno run they sent me via email.

Just download the program and the DRF file and you can play around with it (air/fuel etc)

http://www.dynojet.com/viewer/RunViewer7.0.1.0.zip

http://www.acddragparts.com/dynorun.drf

You can click on the left right or bottom to change what is displayed.

 

Its obvious to me ALL U guy's have NO life What so ever..
Could'nt get laid if UR life depended on it.. SO Why not just Whip
it out and lets see Who's the biggest and Just Be Done with it!!
ps I guess this will teach my Boss not to leave this **** up on the computer here at work <EG>

 

Sorry about that

Looks like someone is going to get fired

 

Fire their ***!

 

Haha what a thread!!! jack

 

hahaha not just thread jack....a computer jack...haha