Window Motor Repair (replace motor brushes?)
#161
Registered User
Join Date: Apr 2004
Location: 916 MAC-TOWN, CA
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
I have been having problems with the driver side. I'm going clean the brushes out and hopefully that works, can't afford new window motor/brushes at this time. I need to get get this done before summer.
#162
Registered User
iTrader: (3)
Join Date: Dec 2005
Location: Vancouver B.C., Canada
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
damn, my window works fine until i go all the way down, then it wont go back UP
i hear a clicking sound like its trying to go up, but it cant
anyone know what the hell is wrong?
i hear a clicking sound like its trying to go up, but it cant
anyone know what the hell is wrong?
Last edited by Azn_Empurio; 02-27-2007 at 07:31 PM.
#163
New Member
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
Have you tried cleaning the motor brushes? There is a write up towards the beginning of the thread.
I had the same problem... cleaned the motor brushes and haven't had the problem again.
I had the same problem... cleaned the motor brushes and haven't had the problem again.
#164
Registered User
iTrader: (3)
Join Date: Dec 2005
Location: Vancouver B.C., Canada
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
really? exact same problem?
yea i think i got carbon buildup on mine too, got 46,000miles on this BIRD
im gonna try to find a friend to help me, or go back to the shop and ask them to help me next time when i install my sideskirts
btw how long has it been working fine for now?
yea i think i got carbon buildup on mine too, got 46,000miles on this BIRD
im gonna try to find a friend to help me, or go back to the shop and ask them to help me next time when i install my sideskirts
btw how long has it been working fine for now?
Last edited by Azn_Empurio; 02-27-2007 at 10:54 PM.
#165
Registered User
Join Date: Sep 2002
Location: Austin, TX
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by z_brit
Great thread. I did the clean fix a few weeks ago, but unfortunately crappy motor only lasted a couple of weeks before it died again.
I'm gonna go the autozone route, since these remanufactured versions are apparently meant to rectify all the original design issues and exceed the OEM standard.
I'm gonna go the autozone route, since these remanufactured versions are apparently meant to rectify all the original design issues and exceed the OEM standard.
Now that I knew how to take apart my door and put it back together (thanks to this thread) it was a lot easier / quicker this time... and now my window works flawlessly.
#166
New Member
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Azn_Empurio
really? exact same problem?
yea i think i got carbon buildup on mine too, got 46,000miles on this BIRD
im gonna try to find a friend to help me, or go back to the shop and ask them to help me next time when i install my sideskirts
btw how long has it been working fine for now?
yea i think i got carbon buildup on mine too, got 46,000miles on this BIRD
im gonna try to find a friend to help me, or go back to the shop and ask them to help me next time when i install my sideskirts
btw how long has it been working fine for now?
This happened about 5-6 months ago and its still working flawlessly.
#168
New Member
iTrader: (29)
Join Date: Apr 2005
Location: Get out my way pimpin, LA
Posts: 33,731
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Azn_Empurio
blasian
cool i told my mechanic were doin this, haha
ill let u know what happens
cool i told my mechanic were doin this, haha
ill let u know what happens
Like I said, I've done it months ago and its still working perfectly. Good luck dude.
#170
Banned
iTrader: (28)
Join Date: Dec 2003
Location: Columbia, Maryland
Posts: 5,028
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Road Warrior
subscribing to this thread...mine is starting to go but under warranty.
how long does it take for the DYI cleaning of the motor?
how long does it take for the DYI cleaning of the motor?
#171
Registered User
iTrader: (18)
Join Date: Aug 2005
Location: Villanova University
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Integrity
An hour or two.
like with me (posted pics in earlier threads) window motor wont go back no matter what so...
i'd say from experience if u do it urself...
hook ur laptop next to the car so u can check this thread as u go along...
#173
Registered User
I just dropped my Roadster off at the dealership, because of leaking around the passenger side window after they reinstalled a new top.
I also have the window going up and then back down using the auto up feature. Did it for a while on the passenger side and now does it on the drivers.
They said I probably need to replace the motors. I am now 4K outside of warranty(only had the car for 2 years though)
I have had the following fixed on my car.
Rear Bearings(both sides) replaced for that gravel sound at 8K
Front Control Arm Replaced at 11K
Tires replaced for feathering issue along with free alignment(of course the problem still isn't fixed)
Window Regulator replaced at 35K
Top Replaced for Common Seam Separation Issue(35K)
CD Player replaced for skipping at 38K(thankfully under warranty - a little grace)
Now Window leaks around new top and wind noise(replaced under warranty)
And now it looks like I haven't escaped the Motor Issue either.
I didn't mind all this crap while they were willing to fix it for free, but $458/motor at the dealership!
I fugure a sports car is like a hot woman - High Maintenance! But dang!
Thanks for the thread guys, if I do end up replacing them, $130 each is a lot better than $450 each!
I also have the window going up and then back down using the auto up feature. Did it for a while on the passenger side and now does it on the drivers.
They said I probably need to replace the motors. I am now 4K outside of warranty(only had the car for 2 years though)
I have had the following fixed on my car.
Rear Bearings(both sides) replaced for that gravel sound at 8K
Front Control Arm Replaced at 11K
Tires replaced for feathering issue along with free alignment(of course the problem still isn't fixed)
Window Regulator replaced at 35K
Top Replaced for Common Seam Separation Issue(35K)
CD Player replaced for skipping at 38K(thankfully under warranty - a little grace)
Now Window leaks around new top and wind noise(replaced under warranty)
And now it looks like I haven't escaped the Motor Issue either.
I didn't mind all this crap while they were willing to fix it for free, but $458/motor at the dealership!
I fugure a sports car is like a hot woman - High Maintenance! But dang!
Thanks for the thread guys, if I do end up replacing them, $130 each is a lot better than $450 each!
#174
Registered User
iTrader: (55)
Join Date: Oct 2006
Location: Irvine, CA
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Okay, I got a call from Autozone today, picked them up afterwork. Install is easy since I've been there. So, long story short, replacement motor works great. LIFETIME WARRANTY, can't beat that. $150 is really pain for a window motor, but at least you know you'll never gonna spend anymore on this. Good luck guys...
#176
Registered User
Originally Posted by chrisnathan
Okay, I got a call from Autozone today, picked them up afterwork. Install is easy since I've been there. So, long story short, replacement motor works great. LIFETIME WARRANTY, can't beat that. $150 is really pain for a window motor, but at least you know you'll never gonna spend anymore on this. Good luck guys...
#177
Registered User
Join Date: Feb 2003
Location: orlando
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
My 2003 was doing this just out of warranty. When I took it in they said they had to reprogram the computer, cost $100 (prob got F'ed but it worked for 30k miles). Now at 60k miles its doing it again. I also hear a nasty rattle coming from the door. Going to open it up tomorrow and see whats going on in there.
Awesome thread guys!!!
Awesome thread guys!!!
#178
Registered User
Join Date: Feb 2003
Location: orlando
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Ok I attempted to do this last night in the garage, not a good idea if you dont have adequate light. On the pass side door I wasnt aware you had to take the "oh ****" handle off so I bent a little of the plastic housing, oh well...
I just got finished taking it apart the correct way, so much easier lol. I the first thing I tried was to reset the regulator and low and behold it worked. My auto up works fine and the window no longer comes down 1/3, whew! They charged me 100 bux to hold the reset switch last time, fockers!...
I also had a really bad rattle that I found to be my cross over for my door speaker. The 2 screws holding it to the door were loose, so I tightened those up. I know we all hate any kind of rattle coming from anywhere, so I killed 2 headaches in one shot. Not only that I am now an expert in removing the door panel lol.
I really want to thank everyone that contributed to this thread to help make all our lives easier, educate us and save us some damn money
I just got finished taking it apart the correct way, so much easier lol. I the first thing I tried was to reset the regulator and low and behold it worked. My auto up works fine and the window no longer comes down 1/3, whew! They charged me 100 bux to hold the reset switch last time, fockers!...
I also had a really bad rattle that I found to be my cross over for my door speaker. The 2 screws holding it to the door were loose, so I tightened those up. I know we all hate any kind of rattle coming from anywhere, so I killed 2 headaches in one shot. Not only that I am now an expert in removing the door panel lol.
I really want to thank everyone that contributed to this thread to help make all our lives easier, educate us and save us some damn money
#180
Registered User
Originally Posted by Zmoney
Ok I attempted to do this last night in the garage, not a good idea if you dont have adequate light. On the pass side door I wasnt aware you had to take the "oh ****" handle off so I bent a little of the plastic housing, oh well...
I just got finished taking it apart the correct way, so much easier lol. I the first thing I tried was to reset the regulator and low and behold it worked. My auto up works fine and the window no longer comes down 1/3, whew! They charged me 100 bux to hold the reset switch last time, fockers!...
I also had a really bad rattle that I found to be my cross over for my door speaker. The 2 screws holding it to the door were loose, so I tightened those up. I know we all hate any kind of rattle coming from anywhere, so I killed 2 headaches in one shot. Not only that I am now an expert in removing the door panel lol.
I really want to thank everyone that contributed to this thread to help make all our lives easier, educate us and save us some damn money
I just got finished taking it apart the correct way, so much easier lol. I the first thing I tried was to reset the regulator and low and behold it worked. My auto up works fine and the window no longer comes down 1/3, whew! They charged me 100 bux to hold the reset switch last time, fockers!...
I also had a really bad rattle that I found to be my cross over for my door speaker. The 2 screws holding it to the door were loose, so I tightened those up. I know we all hate any kind of rattle coming from anywhere, so I killed 2 headaches in one shot. Not only that I am now an expert in removing the door panel lol.
I really want to thank everyone that contributed to this thread to help make all our lives easier, educate us and save us some damn money