Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Just change accesorry belts, and spark plugs

Old Apr 1, 2008 | 06:27 PM
  #1  
syndacit's Avatar
syndacit
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 128
Likes: 0
From: California
Default Just change accesorry belts, and spark plugs

I just changed them and now I have a service engine soon light.

Could it be, because I slipped and moved the throttle plate a little? should I disconnect battery or do the throttle restart and see if that works?

Oh and did forget to reconnect the TPS and started the car twice.

Should I take it to a dealer in the morning and have them check it out?
(I did also have oil on my SPark plug on #6 cylinder )

Last edited by syndacit; Apr 1, 2008 at 06:34 PM.
Reply
Old Apr 1, 2008 | 08:00 PM
  #2  
syndacit's Avatar
syndacit
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 128
Likes: 0
From: California
Default

I'm keep bumpin till someone responds cause i dont want to be a ***** and do a repost
Reply
Old Apr 1, 2008 | 08:22 PM
  #3  
SuperBlack350z's Avatar
SuperBlack350z
Registered User
iTrader: (59)
 
Joined: Feb 2007
Posts: 8,517
Likes: 4
From: Raleigh, North Carolina
Default

just reset the car and see what happens.
Reply
Old Apr 1, 2008 | 08:33 PM
  #4  
syndacit's Avatar
syndacit
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 128
Likes: 0
From: California
Default

Originally Posted by SuperBlack350z
just reset the car and see what happens.
I've disconnected the negative battery cable.
Should I leave it disconnected over night?

Cause it seems I cant do the throttle reset procedures correctly.
If I cant, its still drivable. I can go to a dealer in the morning
Reply
Old Apr 1, 2008 | 08:36 PM
  #5  
SuperBlack350z's Avatar
SuperBlack350z
Registered User
iTrader: (59)
 
Joined: Feb 2007
Posts: 8,517
Likes: 4
From: Raleigh, North Carolina
Default

Originally Posted by syndacit
I've disconnected the negative battery cable.
Should I leave it disconnected over night?

Cause it seems I cant do the throttle reset procedures correctly.
If I cant, its still drivable. I can go to a dealer in the morning
yeah, usually what i do is take off both terminals just in case...go back in the car, press the brake pedal like ten times to make sure all the power is out, then put it back on in the morning.
Reply
Old Apr 2, 2008 | 08:54 AM
  #6  
syndacit's Avatar
syndacit
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 128
Likes: 0
From: California
Default

left neg terminal off. Its gone. Car drives fine, and pulls hard ^.^
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
XM 1
Engine & Drivetrain
29
Jul 10, 2022 07:44 AM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
350z82
Exterior & Interior
19
Oct 1, 2015 06:25 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 02:18 AM.