Post here only if you have had your TRANNY replaced.
Originally Posted by BriGuyMax
Why does it indicate that the engine is programmed to idle too low?? It idles around 650rpm just like many many other vehicles out there.
Originally Posted by albatross83
Is there a TSB on this problem? I've got grinding in 5th gear, and the dealer is trying to tell me it's from the way I'm driving it. On the test drive I shifted 2nd to 5th at ~50MPH because that's the easiest way to demonstrate the problem -- the higher the RPMs are above the perfect rev match, the more it grinds. Which indicates, to me, a synchronizer problem. It does it in a shift from any gear to 5th, as long as the difference in RPMs is significant enough. (e.g., if you're shifting at 2500RPMs the whole time, obviously the drop isn't going to be enough, and it you take more than 1/2 sec to shift, the RPMs have already fallen enough that it won't grind). If there's no TSB, I'm tempted to print out all 31 pages of this whole post and bring it in to the service department.
Had my tranny replaced at 12,000 miles due to it locking-up in 5th gear.
I'm at 22,000 miles now, and while crusing at highway speeds with the clutch fully pressed, when I shift back and forth from 5 to 6 and back to 5......I get a definate GRIND.
Looks like I'll be getting a THIRD tranny.
I have actually been babying this second transmission.
**** **** ****
I'm at 22,000 miles now, and while crusing at highway speeds with the clutch fully pressed, when I shift back and forth from 5 to 6 and back to 5......I get a definate GRIND.
Looks like I'll be getting a THIRD tranny.
I have actually been babying this second transmission.
**** **** ****
Yeah....... It is truly sad that can not get solved. I have absolutely nothing but great things to say about my 2003 Performance model except the tranny and negative camber. But I still say that for the $... Nothing can touch it in (listen carefully): Style & Performnace.
anyone with 05's have tranny issues? heres my problem... https://my350z.com/forum/maintenance-and-repair/153199-tranny-woes.html
any input will be appreciated
any input will be appreciated
Originally Posted by gimpster621
anyone with 05's have tranny issues? heres my problem... https://my350z.com/forum/showthread.php?t=153199
any input will be appreciated
any input will be appreciated
how much does a tranny replacment cost without a warranty? i just bought an 03 w/48,000 miles, and have grinding in 3rd and 5th. dealer said i have up to 60 on the origonal drivetrain warranty.
Originally Posted by clipso 01
how much does a tranny replacment cost without a warranty? i just bought an 03 w/48,000 miles, and have grinding in 3rd and 5th. dealer said i have up to 60 on the origonal drivetrain warranty.
Originally Posted by Acree
i have a 2005 and i am currently on my 3rd tranny. 5k miles so far and still smooth as butter.
Dude..... You must not have said what you meant?
Originally Posted by clipso
01 how much does a tranny replacment cost without a warranty? i just bought an 03 w/48,000 miles, and have grinding in 3rd and 5th. dealer said i have up to 60 on the origonal drivetrain warranty.
Well I won't be finding out.
1st = 5k miles
2nd = 15k miles - And it went all the way up to @ 42k miles!
3rd = I plan to replace my Z this Spring/Summer and I drive @ 1k - 1,200 miles a month. That should be anywhere from 6k - 8k miles more for me. If all goes according to plan...
Well, I just scheduled my appointment for my first tranny replacement. 34K miles here but it's been grinding for a little bit now.
Now, to pick a different flywheel...
(p.s. just got my second set of new front tired under warranty on my 04)
Now, to pick a different flywheel...
(p.s. just got my second set of new front tired under warranty on my 04)
Dear fellow 350Z owners,
I was wondering if you could help me. My Z has 11,000 miles and a few problems may exist. When my clutch is not depressed it makes a rattling sound but when depressed it stops. Also, when shifting into 2nd, clutch fully depresssed it makes a clunk/grind sound, sometimes shifting into 3rd and 4th it isn't so smooth.
Acme South Brunswick Nissan gave some push back on the issues saying they will monitor it but have not ruled out replacing.
Again, I would greatly appreciate it if you could help me. ie: what to say, how your tranny was acting etc
Thanks!
I was wondering if you could help me. My Z has 11,000 miles and a few problems may exist. When my clutch is not depressed it makes a rattling sound but when depressed it stops. Also, when shifting into 2nd, clutch fully depresssed it makes a clunk/grind sound, sometimes shifting into 3rd and 4th it isn't so smooth.
Acme South Brunswick Nissan gave some push back on the issues saying they will monitor it but have not ruled out replacing.
Again, I would greatly appreciate it if you could help me. ie: what to say, how your tranny was acting etc
Thanks!
Last edited by leuhuckun; Nov 22, 2005 at 08:22 PM.
Gearbox replaced at 24K miles(Eventually
)
NissanGB wanted to repair but luckily for me parts were
taking forever to arrive so finally got new 'box.
Grinding started when shifting 3rd to 5th.
Hopefully will be the only replacement needed....
George
NissanGB wanted to repair but luckily for me parts were
taking forever to arrive so finally got new 'box.
Grinding started when shifting 3rd to 5th.
Hopefully will be the only replacement needed....
George
When I had mine replaced @ 17k miles, they replaced the clutch and flywheel at no charge. I would fight them on that. How is clutch gone @ 9k miles?? You would have to be totally beating on it beyond belief or have never driven manual before. Even then, I think it would last over 9k miles.








