Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

HELP! wiring harness connected to fusible link

Thread Tools
 
Search this Thread
 
Old 02-24-2010 | 04:32 PM
  #1  
badluckz's Avatar
badluckz
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 12
Likes: 0
From: philly
Default HELP! wiring harness connected to fusible link

excuse my poor terminology...
The 2 connector harness attached to the bottom of the fusible link on the positive battery terminal is melted through... seems like the fuse should have eliminated the chance of that but it didn't.... anybody know what that harness is???
main harness? sub-harness? its literally connected at 2 plug in points on the bottom side of the fusible link which is on the positive battery terminal, the right side harness (brown) is melted through... toast!

this is the result of the unknown overcharging issue i posted about yesterday.

im broke and scared, i was actually just about to sell this thing.

its about to snow here so i have a few days before i can tow it to the dealer...
trying to figure out what kind of repair costs ill be looking at.

thanks!
Old 02-24-2010 | 05:13 PM
  #2  
Ichigo's Avatar
Ichigo
Registered User
iTrader: (6)
 
Joined: Aug 2005
Posts: 1,622
Likes: 0
From: PA
Default

You should post a pic, it might help
Old 02-24-2010 | 05:18 PM
  #3  
badluckz's Avatar
badluckz
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 12
Likes: 0
From: philly
Default

HELP! wiring harness connected to fusible link-004awr.jpg

it plugs in to the bottom of this which would be directly bolted on to the positive battery terminal at the left side as pictured... couldnt find a better pick.

Last edited by badluckz; 02-24-2010 at 05:21 PM.
Old 02-24-2010 | 05:33 PM
  #4  
z2g's Avatar
z2g
Registered User
iTrader: (20)
 
Joined: Feb 2006
Posts: 1,014
Likes: 0
From: louisiana
Default

Should be the main fuses right?
Old 02-25-2010 | 12:43 PM
  #5  
JasonZ-YA's Avatar
JasonZ-YA
350Z-holic
Premier Member
iTrader: (60)
 
Joined: Jan 2006
Posts: 11,204
Likes: 29
From: San Antonio/I miss DFW, TX
Default

dammn thats sum badluck...

-J
Old 02-25-2010 | 12:44 PM
  #6  
JasonZ-YA's Avatar
JasonZ-YA
350Z-holic
Premier Member
iTrader: (60)
 
Joined: Jan 2006
Posts: 11,204
Likes: 29
From: San Antonio/I miss DFW, TX
Default

no but for real, i would follow that harness wire and visually inspect every freak'n inch of it..........ensure no other section of it is blown, shorting out somewhere...

Ive seen this on 240's and the harness gets melted at other points and you have to replace it..
-J
Old 02-28-2010 | 10:02 AM
  #7  
badluckz's Avatar
badluckz
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 12
Likes: 0
From: philly
Default

wow a new wiring harness.... and i was about to trade this thing in a few days ago.
its like it knew i was about to ditch it, hmmm.
towing it to nissan tomorrow.
thanks for the help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 07:19 AM
MM'08_350Z
VQ35HR
225
04-22-2021 10:42 PM
350Z_Al
Exterior & Interior
133
10-29-2020 08:44 PM
hulkout
Tuning
1
09-30-2015 01:33 PM




All times are GMT -8. The time now is 11:07 AM.