have a 06 350z and it starts but i give it gas and the rpm only goes up to like 1500...can anyone help?

 

Give it more gas.

 

i did all the to the end and rpm's only go up to 1500 or so

 

reset ecu

 

k thanks ill try that... hopefully it will work

 

is it just the tach that's not moving or is the engine not revving up at all?

 

do you hear the engine revving past 1500? or is it stopping?

did it throw a code?

 

Code please? I think the rev up had a oil temp sensor that will put the car into limp mode at a certain temp. If that is bad it would do that. Throttle body or accelerator problems would cause that too. Try and get a code.

 

Here a look at the Fail Safes for various problems. Although most for the Non-Revup DE.

 

not reving up at all

 

ill try to get a code and post it up as soon as i can which will proabably be monday

 

one of the codes is p2135/ p2135(hd) and there was another code but it cleared and this code came up can anyone help me out?

 

http://www.*********.com/zwiki/OBD-I..._(Engine_Codes)

the ***** should read "three fifty zeeee dash tech"


throttle position sensor. seems easy enough to fix

 

Here what the FSM say is the most likely problem.