Hey everyone I went in today to get an allignment and tires plus advised me that both my front two wheel bearings are really lose and my left outer tie rod is bad.. They quoted me a price of $1,000+ to fix it> I talked to some friends and they said I can do it myself fr way cheaper but I just dont know what to buy, am I supposed to buy just the bearing,, or the whole wheel hub. and any links to where i can buy them?

P.S is it safe to drive my car temporarily until I get it fixed?

Any help woule be appreciated =)

 

my advice is to fix it.

 

Which is why I am asking for advice on how to do that.. Do I need the whole hub or just the bearing?

 

Try this

https://my350z.com/forum/search.php?searchid=11970284

 

Here's the DIY on fixing it...

https://my350z.com/forum/brakes-and-...nt-how-to.html

Hub and bearing come as an assembly. CLICK HERE $138.66


You'll have to decide if it's something you want to tackle or not.

 

So simple to do. If your in the Vegas are i would charge $80

 

I just ordered parts I bought both front wheel hubs, and left outer tie rod cost me $360 for all and I have someone doing it for $100 hope thats good deal, lot better than $1300 from Tires plus what a RIP OFF!

 

Did you actually try to see if they were bad? You know shops pull that BS all the time "Well your tie rod end and lower ball joints are bad, $2000 please +blinker fluid cost" and then they don't even change it because it wasn't bad to begin with.