Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Noise going into reverse

Thread Tools
 
Search this Thread
 
Old Mar 14, 2011 | 11:04 AM
  #1  
TNaZZee's Avatar
TNaZZee
Thread Starter
Registered User
iTrader: (2)
 
Joined: Mar 2011
Posts: 30
Likes: 0
From: Maryville, TN
Default Noise going into reverse

Hey all,

New to the 350Z. I have the 04 roadster. I noticed when I put the car in "R" i hear a metalic click sound, kinda loud. If I put it back in drive and move forward and back into "R" no sound. It only seems to make the Click sound after it has been parked for a short time. ANY ideas? I turned the drive shaft by hand it it has a bit of play but not anything out of normal. Point me in the right direction so I know where to start looking.

Thanks
Reply
Old Mar 14, 2011 | 11:15 AM
  #2  
Arvin89's Avatar
Arvin89
Registered User
iTrader: (1)
 
Joined: Feb 2010
Posts: 785
Likes: 0
From: Vancouver
Default

Don't know the exact name of the problem. But search Rear axle click on the forum, you'll find hundreds of posts about it. Its a common problem. The basic jist of the fix is re-greasing? Lubing the rear axle.
Reply
Old Mar 14, 2011 | 02:34 PM
  #3  
TNaZZee's Avatar
TNaZZee
Thread Starter
Registered User
iTrader: (2)
 
Joined: Mar 2011
Posts: 30
Likes: 0
From: Maryville, TN
Default

this noise happens before the car moves. When the tranny is engaging and sounds like it is coming from center area of undercarriage.
Reply
Old Mar 14, 2011 | 03:02 PM
  #4  
VO...'s Avatar
VO...
Administrator
iTrader: (25)
 
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
Default

The answer you seek is in this thread, on the 1st page:

https://my350z.com/forum/2003-2009-n...questions.html
Reply
Old Mar 15, 2011 | 12:30 PM
  #5  
TNaZZee's Avatar
TNaZZee
Thread Starter
Registered User
iTrader: (2)
 
Joined: Mar 2011
Posts: 30
Likes: 0
From: Maryville, TN
Default

The noise I have is not constant and does not occur in the instances for the axel clicking. Definetly coming from the tail housing of the tranny area. Two clicks when engaging into reverse. If I have been driving and put it into park tiurn the motor off and then back on and put it in reverse, no click. If it sits for more than 30 minutes and I put it in reverse " CLick". I will service the axels but like I stated, it ain't coming from the axels.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Obadabot
Maintenance & Repair
16
Jun 18, 2023 11:31 PM
wanderingstuden
Maintenance & Repair
6
Jan 28, 2016 07:03 PM
hulkout
Tuning
1
Sep 30, 2015 12:33 PM
samansharif
Brakes & Suspension
1
Sep 25, 2015 12:31 PM




All times are GMT -8. The time now is 01:06 AM.