Please help! Oil pressure gauge
#1
Registered User
Thread Starter
Join Date: Nov 2012
Location: Phoenix AZ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Please help! Oil pressure gauge
Alright well this morning on my way to work I notice my oil pressure gauge is above 120psi and it doesn't move unless I turn off the car and it goes back down. Also when I put it in acc it goes to 120 and when I turn it on it goes pass 120. Is this bad or is it just the sensor unit or something? Thanks oh and it's a 04 350z with 86k and all maintains done on time (automatic)
#11
Registered User
iTrader: (11)
I just replaced my Oil Sending Unit and I'm still having the same issue.
The dipstick is reading near the "H" mark and this is what the oil gauge reads. At this point I'm thinking it might be the gauge itself that needs to be replaced, is there something else that it could be?
-60 PSI at start up
-Fluctuates between 60-90 PSI during acceleration
-Drops below 60 PSI after 10-15 min
-Drops 30 and below after 30 min
The dipstick is reading near the "H" mark and this is what the oil gauge reads. At this point I'm thinking it might be the gauge itself that needs to be replaced, is there something else that it could be?
-60 PSI at start up
-Fluctuates between 60-90 PSI during acceleration
-Drops below 60 PSI after 10-15 min
-Drops 30 and below after 30 min
#13
Registered User
iTrader: (11)
No I still have the same issue. I'll probably end up replacing the gauge itself. I'm thinking I've removed that center console many times so maybe in the process I've damaged it somehow. I've driven her several times and the oil dipstick seems to be reading normal each time.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM