dipping idle
Thread Starter
Registered User
iTrader: (14)
Joined: Feb 2009
Posts: 1,582
Likes: 1
From: Lynnwood WA
when i rev in neuteral and the rev is coming back down it dips to 0 and car shutters and almost turns off.
i checked everything dont know what up
i recently change valve covers and spark plugs. and cleaned the fuel injectors too.
i also had the code p0113 - intake air temp sensor 1 circuit high input
but i cleared the code and hasnt came back for about 50 miles
i cant find any vaccumn leaks or anything
ALSO car barely starts sometimes and even shut off once.
i checked everything dont know what up
i recently change valve covers and spark plugs. and cleaned the fuel injectors too.
i also had the code p0113 - intake air temp sensor 1 circuit high input
but i cleared the code and hasnt came back for about 50 miles
i cant find any vaccumn leaks or anything
ALSO car barely starts sometimes and even shut off once.
http://www.obd-codes.com/p0113
You don't seriously think that simply clearing a code is going to make the problem go away, do you?
You don't seriously think that simply clearing a code is going to make the problem go away, do you?
Thread Starter
Registered User
iTrader: (14)
Joined: Feb 2009
Posts: 1,582
Likes: 1
From: Lynnwood WA
here is a video.. you can hear the car trying to stall
http://www.youtube.com/watch?v=QqAi0...ature=youtu.be
http://www.youtube.com/watch?v=QqAi0...ature=youtu.be
Thread Starter
Registered User
iTrader: (14)
Joined: Feb 2009
Posts: 1,582
Likes: 1
From: Lynnwood WA
Bump! Any one?
The code has completely gone away I think. Drove about 200miles or so and code clean.
But this idle dipping on rpm downfall or clutch depress is no good
Having hard time starting sometimes. It stumbles and then catches up and idles normal
The code has completely gone away I think. Drove about 200miles or so and code clean.
But this idle dipping on rpm downfall or clutch depress is no good
Having hard time starting sometimes. It stumbles and then catches up and idles normal
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
Jan 2, 2022 12:58 PM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM




