Hey guys I'm back again with a bizarre problem again...

So yesterday I upgraded my headlights to the 06+ bi-xenon headlights, yes I did have factory HID's on my Z so it was just plug in and play for me. They look sick all the lights: the running lights, High beams, turn signals, hazards etc all turn on...

But the problem I'm having occurs when I have my signals on and I actually turn, either left or right, the blinker does not stop blinking...

I KNOW should have flushed the "BLINKER FLUID" hahah... But all jokes aside whats going on and why is this happening??

_____________________

Some background info to help things out:

--I own a 2004 350z that came with factory HID lights from Nissan

-- The lights I bought came off a 2006, 2007 or 2008 350z and yes they are the factory Nissan lights not replicas like the DEPOS or something
( see it says Nissan on them thats how I know)

--The lights came with everything; housing, wiring, bulbs, ballast the entire set up and yes all from Nissan too..


--Reason I got them was cause my old ones were always hazing after a couple weeks, and the tabs on my passenger side was broken so bumpy roads would make my light bounce around... These were in mint condition and the guy was parting out his car since he was in a rear end collision


Please help me out if you or anyone u know has had this kind of issue

-Thanks in advance! (unless ur a D!CK)

 

OKAY this was a quick end to an annoying problem.

I decided to do a couple of things and don't know which of these fixed the problem but heres everything I did today which helped out


1. disconnected my battery (doubt it did anything but its something I did while I did the other steps).
2. disconnected my headlights and sprayed "CRC Electric Parts Cleaner" on both male and female receptors of the headlights.
3. turned my key and blinker, BUT forgot the battery was disconnect.. so I hammer hit my steering wheel/ odometer a few times and realized there was no power to anything.
^^^^honestly I think this was the fix cause something fell back into place

4. reassembled everything and connect my batter went for a drive and presto the blinkers stop blinking when I take turns.


Hope this helps. Really wish I knew what the deal/ solution was but thats my story