trouble starting, been chasing the issue for a while!
#1
New Member
Thread Starter
trouble starting, been chasing the issue for a while!
hey so I’ve got an 03 350z with a de motor that died on me during a drive to work, so from the beginning the car had a slight tick shortly after driving it for a little so I changed the oil and the tick went away, not long after that I started getting a rattle only on startup for about a couple seconds and then it would go away, the rattle was present whether it was cold or up to temp, I assumed it was the timing chain tensioners. So finally about a week passes by of just normal daily driving and then one morning when I go to start it up and go for a drive I the tick is back, mid drive down my street going about 20 mph the car dies, it instantly gives me a cam sensor bank 1 and random misfire (p0340, p0300) the car would start and then instantly die , I wasn’t even able to rev it to keep it running, I proceed to push the car home and eventually change my spark plugs, both cam sensors and the crankshaft sensor and after all that was done the car just continues to crank and no longer starts up.
if anyone has any ideas as to why this is happening please let me know or help me out I’ve been chasing the issue for over a month and I don’t know what else to do, I don’t know too much about working on cars.
i have some theories about why it’s not running but I don’t wanna be guessing and chasing this issue anymore I need other input
edit:
https://www.youtube.com/watch?v=zsOW...ature=youtu.be here is a video of me cranking the car
if anyone has any ideas as to why this is happening please let me know or help me out I’ve been chasing the issue for over a month and I don’t know what else to do, I don’t know too much about working on cars.
i have some theories about why it’s not running but I don’t wanna be guessing and chasing this issue anymore I need other input
edit:
https://www.youtube.com/watch?v=zsOW...ature=youtu.be here is a video of me cranking the car
Last edited by domz33; 04-22-2020 at 08:59 AM.
#3
New Member
Thread Starter
I got two cam sensors from 1a auto and swapped them out earlier, I actually was able to crank and start the engine BEFORE I replaced bank 1 and bank 2, but now it just cranks and cranks
The following users liked this post:
domz33 (04-22-2020)
#5
New Member
Thread Starter
#7
New Member
Thread Starter
haha yeah the steering wheel is absolutely BEAT, but to answer your question, yes I can hear the fuel pump buzz on as soon as I turn the key
Last edited by domz33; 04-25-2020 at 04:13 PM.
Trending Topics
#9
New Member
Thread Starter
#11
New Member
Thread Starter
350z no start still cranks, video in post
hey ive got an 03 350z with dc headers and it died on me while driving and I got a p0300 and p0340, I replaced both cam and crank sensors with non oem, didnt work, went back and replaced my bank 1 sensor with an oem sensor and it did not work, can anyone help me out? its my daily and I need to get back to work since everything is re opening
The following users liked this post:
dkmura (06-18-2020)
#13
New Member
Check your timing dawg
Thread
Thread Starter
Forum
Replies
Last Post
Jackson0927
Maintenance & Repair
10
11-01-2012 03:51 PM