Headers, especially the Strup headers, are one of the best performance upgrades to NA Z/G’s. Here at Function:TUNED we realize that once the labor price is factored in headers can become a little unreasonable for the expected HP gains. We aim to solve this by offering our STRUP HEADER INSTALL PACKAGE. We decided on the Strup headers specifically for their overall production quality, fitment, and power gains. As you can see from the dyno graphs below the Strup headers gain horsepower across the board from the start of the graph al the way through redline. More Importantly the Strup headers can generally gain you 15 to 22 lb/ft of torque in the midrange starting at about 3000rpm through 5000rpm. This is where you will really FEEL the difference. Peak HP is a great indicator of total power but it’s also only one point on the graph. Just take a look at these dyno charts and you can see that the so-called “area under the curve” is huge!











Strup Header Specs

• T-304 #1 grade stainless steel tubing
• Polished to a bright luster.
• 1 5/8” mandrel bent tubing X .065 wall thickness.
• Flange is 3/8” thick stainless steel.
• All headers are TIG welded construction.
• Provides 14-15 horsepower gains.

Add a set of Strup Stainless Steel 2.5” (largest on the market) Mandrel Bent Test Pipes to the Function:TUNED Header Install Special for just $169.95 INSTALLED! (Normally $190.86)*

Test Pipe Specs:

• T-304 #1 grade stainless steel tubing
• Polished to a bright luster
• 2 1/2” mandrel bent tubing X .065 wall thickness.
• Flange is 3/8” thick stainless steel
• TIG welded construction.
• Provides 8-10 horsepower gains

Plus 02 Cat Simulators (to help avoid unsightly check engine lights) installed at no extra charge! A $40 value.


*Must be purchased and installed at the same time as the headers. Test Pipes are for off-road use only.

 

how long does the installation take and are you open on weekends?

 

about 6 hours.. we are open on sat. 11 am - 6 pm

 

will adding headers to my nismo+ test pipe combo make it even more louder? I know thats a stupid question but I havent seen much on the forums with nismo exhaust and headers

 

it might get a little bit louder but ur set up is already loud. so it will be hard to tell the diference

 

sorry to be off topic but is Fuction Tuned run by Dave who used to work at AAM?

 

Yes. All I have to say is they have THE BEST service and the cleanest shop you have ever seen. If I was still NA I would be all over this. Its a hell of a deal.

 

I saw Dave at Fur a while ago and told me he was openning his own shop but I didn't remember the name so I was wondering. It is a hell of a deal and if I knew I was going to go SC then I would do this as well. Dave is a h*ll of a guy and I wouldn't expect anything less from him. Props for openning your own place Dave.

 

will the headers pass emissions in VA?

 

+1 on the shop and service and being NA, yeah, I'm on it.

 

very good deal indeed

 

My Strup headers were installed by Dave and he did a hell of a job. His attention to detail and customer service are unmatched.

As far as state inspections go, I know here in MD if you're not throwing a code you pass. The headers will not make you throw a code. The test pipes might if you didn't have the simulators, but Dave's throwing them in for free. A great deal from a great shop.

 

will this set up make any gains with a vortex sc?

 

Wow... this is a hell of a deal. If I had my Z still and was in NoVA I'd jump all over this... and I don't even like people doing my work.

I keep hearing nothing but good things from the old Mid-A crew about you guys... keep up the good work.

Tony (thinks all N/A guys staying N/A in the area are retards if they don't jump on this)

 

I was contemplatin on goin FI soon but the $$ and pain I will probably suffer outweighed the gains I can get. I shall jump on this deal within the month. Hope this offer is good til then.

Dave do you have a dyno at the shop? I would also like to get a pre install dyno and after to make me feel that my money was not wasted =)

Will I need a tune after the headers?

Current mods are MREV+ spacer, popcharger, test pipes, nismo catback

 

It should.

It would be good to get a tune, but do you have a form of EMS to do it with? Even if you don't you would probably just lean out a little bit, nothing major. I bet that setup with a UTEC and in Dave's capable hands, you could probably get a nice HP gain! Definatly be one of the quicker Z's!

PS can you PM me some tranny prices if you have/can get ahold of any =)

 

Wow.. hot dam thats a hella deal. wish I had the spare loot to jump on it!

 

I want to party @ FUR!

 

I had strup headers on for 10k miles......... it works great, no leak, good gain...... don't miss this chance guys.

 

What if I just wanted to get the test pipes installed w/ the o2 bungs, can I still get the hook up?