327whp New Intake Plenum + LS2 90mm TB - Dynos, Video, Pics
02-01-2010, 05:43 AM
#84
they need to demo this product if they make it on a complete stock DE Z. With no mods done to it as far as Cams, Exhaust work, Intake work. Then and only then will we see true gains if that. Otherwise its basically only working well with the mods they have now as i see it. NO OFFENSE!
Last edited by Dr. Venture; 02-01-2010 at 08:50 AM.
02-01-2010, 08:49 AM
#85
Administrator
iTrader: (25)
VO...
02-01-2010, 09:06 AM
#86
Administrator
iTrader: (25)
Thread cleaned up. Stick to the topic gents. Carry on...
VO
VO
02-01-2010, 01:02 PM
#89
Registered User
Join Date: May 2004
Location: Largo, MD
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
IIRC, his original baseline dynos were pretty much on par with most of dyno charts found here on the forum.
Either way, try not to focus too much on the actual hp number. Dynos do read differently. Focus on the difference in hp and gains achieved from adding these mods over the base pull.
Either way, try not to focus too much on the actual hp number. Dynos do read differently. Focus on the difference in hp and gains achieved from adding these mods over the base pull.
02-01-2010, 01:07 PM
#90
Registered User
Join Date: May 2004
Location: Largo, MD
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Their was a guy who made a thread last summer when he swapped out his stock TB for a stock Titan TB. Plugged in w/out any said issues. Don't know why he did it, but I don't think he saw any gains. Stock for stock, they are both the same size.
I can only assume that if the stock Titan TB plugs right in, then a ported aftermarket 90mm Titan TB should be a direct fit also.
*Edit* Rob posted the link above my other post. Thank you sir.
I can only assume that if the stock Titan TB plugs right in, then a ported aftermarket 90mm Titan TB should be a direct fit also.
*Edit* Rob posted the link above my other post. Thank you sir.
Last edited by PlatinumSR20; 02-01-2010 at 01:10 PM.
02-01-2010, 01:34 PM
#92
what I found on the titan forums is that there was a company who made a very limited batch of conversion Ls2 TBs for the titan. they plugged right in but they only made 10 of them and they were $700 plus a core.
I'd be interested to see how much diameter makes a difference in the TBs on this setup. I know the vk throttle body could probably be bored out close to 78mm. not sure if its worth the hassle though.
I'd be interested to see how much diameter makes a difference in the TBs on this setup. I know the vk throttle body could probably be bored out close to 78mm. not sure if its worth the hassle though.
02-01-2010, 01:42 PM
#93
Registered User
Join Date: May 2004
Location: Largo, MD
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
For those who are interested...On the Titan forums, there is a forum member that started making aftermarket TBs. It's called the PGM Throttle Body (full kit system). With this throttle body kit and an uprev tune, the Titan guys have been having pretty good success with it from what I've heard. Maybe "Uprev" can chime in.
I haven't read all of it though...
http://www.clubtitan.org/forums/showthread.php?t=29922
but "PGM Throttle Body" comes up with a ton of hits when searched.
Last edited by PlatinumSR20; 02-01-2010 at 01:45 PM.
02-01-2010, 02:11 PM
#94
Registered User
iTrader: (6)
Join Date: Jul 2007
Location: F@R @W@Y
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
they have a thread there guaging interest in 90mm throttle body made by accufab. the price is predicted to be $400 or less. i plan on buying one when they come out.
02-01-2010, 03:35 PM
#96
Registered User
Join Date: May 2004
Location: Largo, MD
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
02-01-2010, 03:53 PM
#97
Registered User
iTrader: (2)
Join Date: Aug 2008
Location: Raleigh, NC
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Great info, Subscribed. I'd like to see this plenum and throttle body combo on a stock 350z with dyno comparison.. If they power is good, I can see everybody selling their plenums and spacers
