the_coupe

iTrader: (4)

purdyyy

Classy

iTrader: (7)

It makes installing the pistons SOOO easy, I watched my friend with a sr20 try and use the adjustable one, the compressor is soooooooo worth it!

Zazz93

iTrader: (2)

It was the best single use tool (I hope) I ever bought.

e30cabrio

iTrader: (30)

Made it super easy to get the piston in.

This just in!






Sandwich plate will be here Thursday.

e30cabrio

iTrader: (30)

Lines are #1 22" long with a 90* and a 45* fitting line #2 17 1/2" long with 2 90* fittings.

If I put it as far over as I can anyone know if it will work or do I need longer lines? (These came with the cooler)

Classy

iTrader: (7)

I am still trying to decide if I need one of these or not

Cux350z

iTrader: (162)

you will probably need longer lines. I relocated mine from the drivers side wheel well area to in front of my IC. Hose lengths stayed the exact same.



It took quite a bit of hose to get around and down to the oil cooler adapter plate. Bend radius is gradual which eats up a lot of the line.

You will have to mount your cooler up high so that the fittings are not so low.

previous location:

e30cabrio

iTrader: (30)

I am deleting the oem oil warmer. How much do you think I need?

Thanks!

Cux350z

iTrader: (162)

My shorter run was about 36" +-

e30cabrio

iTrader: (30)

Thanks, I bought a male to male union to put these together and I'll get a 40" hose.

Zazz93

iTrader: (2)

Yeah, Mine is on the driver's side and use 5 and 4 feet of line, I don't think 2 feet will cut it even from the passenger side, but look around under there get a little creative and maybe you'll find a solution. The offeset fittings (two on the same side) may help you make that work. Just keep it in free air.

Cux350z

iTrader: (162)

You would be better off with replacing both hoses.

1 more union equals 4 more leak locations. 2 more fittings that can break, strip ect.

I hope you got a good deal on the kit.

I built mine from the DIY on here and it wasnt that expensive and my lines are a perfect fit.

Cux350z

iTrader: (162)

also just cleaned things up a bit.

Waterproof connector for temp sensor connection
and covered up the blue aeroquip hoses with braided nylon. Makes it a lot cleaner. Using the flash on the camera shows the blue behind the nylon but in person its hard to tell.

Heres how mine looks with the bumper on.

e30cabrio

iTrader: (30)

Looks great. Thanks.

e30cabrio

iTrader: (30)

One of the two longer lines I need for the cooler are here!

e30cabrio

iTrader: (30)

Mocal sammich anyone?

e30cabrio

iTrader: (30)

Above post was from the 16th. Called today, asked how it was going. They have not started and don't expect to start till mid week next week.

Realistically, they say three weeks until they are done. That means it will be 5 weeks.

I was joking when I said I'd like to be done by Christmas.

Classy

iTrader: (7)

That is still alot faster than mine went, what bothers me is what they have to do is relatively easy... It should not take that long... I see you got a thermostatic sandwich, good move!

e30cabrio

iTrader: (30)

I have no clue why they are so slow.

Yup, cooling in Az is no joke!

e30cabrio

iTrader: (30)

Fuel pump & injectors came. Some day I'll get them in my car.