Notices
New Owners Welcome to the Family!

HP chips for the 350Z.

Old Oct 1, 2008 | 07:06 AM
  #1  
djcarmine723's Avatar
djcarmine723
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 26
Likes: 0
From: west covina, ca
Default HP chips for the 350Z.

I just got a 350Z, real nice, Grand Touring and all that good stuff. I want to start doing work to the engine, cold air intake, exhaust, headers, etc. However, I currently found out about an electronic chip that is supposed to add like 35-50HP. I want to know from anyone if it's as easy as it sounds, and if you would recommend it. I was thinking about it only because to increase my HP 35-50 in engine work would cost thousands of dollars, while this chip is like 100 bucks. Any feedback is greatly appreciated. Thanks.
Reply
Old Oct 1, 2008 | 07:09 AM
  #2  
jehamilton_98's Avatar
jehamilton_98
New Member
 
Joined: Jan 2004
Posts: 312
Likes: 0
From: Kentucky
Default

What is the name of the chip?
Reply
Old Oct 1, 2008 | 07:11 AM
  #3  
WhiteNoiz's Avatar
WhiteNoiz
Registered User
 
Joined: Oct 2007
Posts: 1,695
Likes: 0
From: Boise, Idaho
Default

Those chips are a scam. Also, be careful what intake you get. The design on the stock CAI is very good. As far as aftermarket intakes, not many yield a gain, but actually a loss. A lot of people go with the pop charger, which can gain you +/- 6hp, but heat soak can be an issue.

Last edited by WhiteNoiz; Oct 1, 2008 at 07:20 AM.
Reply
Old Oct 1, 2008 | 07:14 AM
  #4  
djcarmine723's Avatar
djcarmine723
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 26
Likes: 0
From: west covina, ca
Default

I think the chip is an SLR chip. As for the intake, I was thinking the Nismo dual intake. It says it adds like 8HP. Also, I love cars, but know jack crap, which is why I joined the forum. This way people who know their stuff can guide me. Thanks.
Reply
Old Oct 1, 2008 | 07:28 AM
  #5  
Madbomber's Avatar
Madbomber
New Member
iTrader: (1)
 
Joined: May 2008
Posts: 173
Likes: 0
From: georgia
Default

dont get that chip!! chip should be your last mod followed by a dyno and tune. expect to be investing big bucks on the z cause no parts are cheap. done a lot of work on mine for very little performance gain. if u really want power, install a turbo. otherwise it would cost about the same to keep it naturally aspirated totally bolted on but way less power
Reply
Old Oct 1, 2008 | 07:32 AM
  #6  
Bumpinjeep's Avatar
Bumpinjeep
New Member
15 Year Member
Liked
Loved
iTrader: (3)
 
Joined: Mar 2006
Posts: 5,743
Likes: 25
From: Bellevue Wa
Default

Congrats on your new car. What year did you get?
Reply
Old Oct 1, 2008 | 07:33 AM
  #7  
Spork's Avatar
Spork
Registered User
iTrader: (6)
 
Joined: May 2007
Posts: 27,592
Likes: 6
From: MN
Default

When people get the Z... do they fail to realize that parts and insurance for it are expensive?

Don't buy cheap sh*t that doesn't work...

In the world of the Z... you have to pay to play. Cheap horsepower doesn't exist here.




Welcome to the forum. Pics of car?

Last edited by Spork; Oct 1, 2008 at 07:35 AM.
Reply
Old Oct 1, 2008 | 07:39 AM
  #8  
djcarmine723's Avatar
djcarmine723
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 26
Likes: 0
From: west covina, ca
Default

Bumpinjeep, I got a 2008.
As for not wanting to spend big bucks, that is not quite what I wanted to say. I am willing to spend a lot of money on my Z, I merely wanted to see what the chip was all about and if it was as good as it sounded, that was all. Like i said, I know very little about cars, and that is why i joined the forum, to make sure I don't make mistakes on my car, and from the feedback I am getting, I know a little more about what I am doing. So no chip. Got it.
Reply
Old Oct 1, 2008 | 07:45 AM
  #9  
Madbomber's Avatar
Madbomber
New Member
iTrader: (1)
 
Joined: May 2008
Posts: 173
Likes: 0
From: georgia
Default

take a look at my signature to get an idea of some parts if you want to keep the car non turbo. my goal was to mod the car as far as can afford keeping it naturally aspirated. happy with how everything came together. its been a 3 yr project thus far and only thing looking to still do engine wise is a $1000 chip with tune and dyno. the car gets daily compliments on its sound but personally think it barks louder than it bites. raced a modded cobra yesterday but he pulled ahead a car length before hitting third.

Originally Posted by djcarmine723
Bumpinjeep, I got a 2008.
As for not wanting to spend big bucks, that is not quite what I wanted to say. I am willing to spend a lot of money on my Z, I merely wanted to see what the chip was all about and if it was as good as it sounded, that was all. Like i said, I know very little about cars, and that is why i joined the forum, to make sure I don't make mistakes on my car, and from the feedback I am getting, I know a little more about what I am doing. So no chip. Got it.
Reply
Old Oct 1, 2008 | 07:46 AM
  #10  
WhiteNoiz's Avatar
WhiteNoiz
Registered User
 
Joined: Oct 2007
Posts: 1,695
Likes: 0
From: Boise, Idaho
Default

Originally Posted by djcarmine723
Bumpinjeep, I got a 2008.
As for not wanting to spend big bucks, that is not quite what I wanted to say. I am willing to spend a lot of money on my Z, I merely wanted to see what the chip was all about and if it was as good as it sounded, that was all. Like i said, I know very little about cars, and that is why i joined the forum, to make sure I don't make mistakes on my car, and from the feedback I am getting, I know a little more about what I am doing. So no chip. Got it.
08, nice! Yes you should see that gain with the Nismo dual intake. A couple ideas to make more power. A plenum spacer, and a TD exhaust would be complimentary to the intake your considering. Even then, you will probably be looking at an added 30 hp(ish) depending on the what you pick out.
Reply
Old Oct 1, 2008 | 10:46 AM
  #11  
NISMO_558's Avatar
NISMO_558
Registered User
iTrader: (1)
 
Joined: Dec 2006
Posts: 4,003
Likes: 4
From: Minnesota
Default

Originally Posted by WhiteNoiz
08, nice! Yes you should see that gain with the Nismo dual intake. A couple ideas to make more power. A plenum spacer, and a TD exhaust would be complimentary to the intake your considering. Even then, you will probably be looking at an added 30 hp(ish) depending on the what you pick out.
, nismo intakes add 0 horsepower sorry to say, and theres no plenum spacers available for the HR. To gain 30hp on an HR, you need every bolt-on available plus an ECU reflash.
Reply
Old Oct 2, 2008 | 10:21 AM
  #12  
J.R. STAR's Avatar
J.R. STAR
Registered User
 
Joined: Sep 2008
Posts: 2
Likes: 0
From: ATL
Thumbs up Straight Bull

Dont waste your money on the SLR joint. It's not even a chip, It controls the air flow and attaches to the Air fliter wires. I have seen no difference in horse power what so ever. But I do have to say that I have seen a differnce in gas consumption. That is the only reason I did not send that junk back, gas is crusial in da ATL right now! This Z owner is suppose to be hooking me up with some one who knows how to adjust the settings on the factory chip. He claims that the guy makes the shift points better and takes off all factory limits. So the car is like an over seas version with no governor. And he says it does not affect the factory warranty, so of course I am trying to find this guy. Will let you know when I find him how it went!
Reply
Old Oct 2, 2008 | 10:52 AM
  #13  
HATED1's Avatar
HATED1
Registered User
iTrader: (2)
 
Joined: Sep 2008
Posts: 298
Likes: 0
From: WA
Default

Welcome! i can't answer any of your questions, but welcome! any pics of the car?
Reply
Old Oct 3, 2008 | 03:49 PM
  #14  
davidv's Avatar
davidv
Registered User
iTrader: (2)
 
Joined: Jun 2004
Posts: 42,753
Likes: 11
From: Tucson, AZ
Default

Reply
Old Oct 5, 2008 | 11:28 PM
  #15  
BRONZEE's Avatar
BRONZEE
Club Moderator
 
Joined: May 2006
Posts: 6,973
Likes: 7
From: New Zealand
Default

Welcome to the forum, congratZ on the 08, and this maybe helpful.

https://my350z.com/forum/2003-2008-n...questions.html
Reply
Old Oct 18, 2008 | 02:08 PM
  #16  
Blown03's Avatar
Blown03
Registered User
 
Joined: Jan 2008
Posts: 28
Likes: 0
From: Charleston, SC
Default

Originally Posted by djcarmine723
Like i said, I know very little about cars, and that is why i joined the forum, to make sure I don't make mistakes on my car, and from the feedback I am getting, I know a little more about what I am doing. So no chip. Got it.
No worries man, we'll all been there at one point. 99% of the "chips" you see out there advertising these big gains are pure BS. A "chip" should be used as a tuning device after your major modifications have been done, at that point a chip would be benificial. Unfortunately the Z doesn't respond really well to bolt-on mods, you'll have to spend a bit of money to get some decent power out of it.
Reply
Old Oct 18, 2008 | 08:49 PM
  #17  
jray8's Avatar
jray8
Registered User
 
Joined: Oct 2007
Posts: 2,860
Likes: 0
From: Tennessee
Default

Originally Posted by davidv
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rev_Night
Wheels & Tires
30
Nov 7, 2020 06:00 PM
350z82
Exterior & Interior
19
Oct 1, 2015 06:25 PM
Alexreyes
2003-2009 Nissan 350Z
13
Sep 30, 2015 11:30 PM
Dymsi
Exterior & Interior
14
Sep 29, 2015 11:32 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 05:59 AM.