My first Z..35th
#1
Registered User
Thread Starter
Join Date: Dec 2009
Location: Ft. Campbell, KY
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#13
Registered User
Thread Starter
Join Date: Dec 2009
Location: Ft. Campbell, KY
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Just noticed that about the headlights...hmmm I guess the previous owner might have switched them out...Any other suggestions on that??
Not Airborne yet...I am Air Assault though
Not Airborne yet...I am Air Assault though
#16
Registered User
Thread Starter
Join Date: Dec 2009
Location: Ft. Campbell, KY
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Painted stock 18's
*/I really liked the wheels with the stock finish. I decided to paint these because 3 of them were curbed when I purchased the Z.
-Removed and cleaned the wheels.
-I used a heavy grit sanding block where the wheels were curbed to help smooth them out. Used a light grit on the rest of the wheel.
-Cleaned and then painted with a hammered finish spray paint.
-This type of paint isn't a smooth glossy finish, which I prefer.
*Also a good idea to paint the rotors while the wheels are off. Makes for a lil cleaner look.
Hope this paint holds up...
here are a few pics
-Removed and cleaned the wheels.
-I used a heavy grit sanding block where the wheels were curbed to help smooth them out. Used a light grit on the rest of the wheel.
-Cleaned and then painted with a hammered finish spray paint.
-This type of paint isn't a smooth glossy finish, which I prefer.
*Also a good idea to paint the rotors while the wheels are off. Makes for a lil cleaner look.
Hope this paint holds up...
here are a few pics
Last edited by bmaloy32; 12-30-2009 at 07:40 AM.
#20
New Member
iTrader: (2)
*/I really liked the wheels with the stock finish. I decided to paint these because 3 of them were curbed when I purchased the Z.
-Removed and cleaned the wheels.
-I used a heavy grit sanding block where the wheels were curbed to help smooth them out. Used a light grit on the rest of the wheel.
-Cleaned and then painted with a hammered finish spray paint.
-This type of paint isn't a smooth glossy finish, which I prefer.
*Also a good idea to paint the rotors while the wheels are off. Makes for a lil cleaner look.
Hope this paint holds up...
here are a few pics
Attachment 270529
Attachment 270530
Attachment 270531
-Removed and cleaned the wheels.
-I used a heavy grit sanding block where the wheels were curbed to help smooth them out. Used a light grit on the rest of the wheel.
-Cleaned and then painted with a hammered finish spray paint.
-This type of paint isn't a smooth glossy finish, which I prefer.
*Also a good idea to paint the rotors while the wheels are off. Makes for a lil cleaner look.
Hope this paint holds up...
here are a few pics
Attachment 270529
Attachment 270530
Attachment 270531
looks really good! thanks for the info, and welcome home