Detroit Area Z List part 3
#3342
Originally Posted by Datona Jess
I agree 100%...
A car with that much power you have to be on the top of your game to drive.
I don't want you to be "naturally selected"
If you wanna meet up tomorrow night, I will probably be by Woodward anyway.
A car with that much power you have to be on the top of your game to drive.
I don't want you to be "naturally selected"
If you wanna meet up tomorrow night, I will probably be by Woodward anyway.
I wouldn't mind meeting up tomorrow night, And doing some beers
#3343
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
Alright guys, I don't even have the car yet and I'm already about to purchase some mods haha.
So I wanna do intake/exhaust soon and this is what I'm thinking:
1) JWT popcharger
2) Berk High Flow Cats
3) Greddy Evo2 exhuast
I really liked the sound of AJ's car, but I didn't like the rasp. So I think I'll be keeping the deep grumbling sound with the evo2 and getting rid of the rasp (and CEL) with the high flow cats. Is that correct?
Also i read that with the JWT, at high speeds if you put it in the neutral the car stalls? That seems kinda dangerous........
On a side note, I know I have to listen to other exhausts first before I make my purchase, I plan on doing that at the upcoming meets.
So I wanna do intake/exhaust soon and this is what I'm thinking:
1) JWT popcharger
2) Berk High Flow Cats
3) Greddy Evo2 exhuast
I really liked the sound of AJ's car, but I didn't like the rasp. So I think I'll be keeping the deep grumbling sound with the evo2 and getting rid of the rasp (and CEL) with the high flow cats. Is that correct?
Also i read that with the JWT, at high speeds if you put it in the neutral the car stalls? That seems kinda dangerous........
On a side note, I know I have to listen to other exhausts first before I make my purchase, I plan on doing that at the upcoming meets.
#3344
New Member
iTrader: (1)
Join Date: May 2006
Location: somewhere cold
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
I've read plenty on the JWT and ruled that over other CAI systems... but then I read the '06 airbox with a drop in K&N will do better than the JWT. If you're getting a pre '06 model I would look on the forum for someone with an '06 airbox..... the '06 has a venturi design like the JWT and is enclosed to avoid heat soak that can plague the JWT
But in all honesty it's just an intake so I don't think you'll notice a real world difference between the two.
HFC should eliminate the rasp that test pipes can add. I thought AJ was running the Berk HFCs on his though.... I might be wrong though.
But in all honesty it's just an intake so I don't think you'll notice a real world difference between the two.
HFC should eliminate the rasp that test pipes can add. I thought AJ was running the Berk HFCs on his though.... I might be wrong though.
#3345
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Good for you Rob.
The 06 airbox is good, but if you get a good long-ram intake, that has to help more. Just my .02. on that. Don't forget to look into the plenum spacers, etc.
WE can help you get all that stuff on no problem.
The car car will have a much different sound then mine, but still sound good!
Jeff-I have the Berk Test pipes. They are a bit raspy but I like the sound.
The 06 airbox is good, but if you get a good long-ram intake, that has to help more. Just my .02. on that. Don't forget to look into the plenum spacers, etc.
WE can help you get all that stuff on no problem.
The car car will have a much different sound then mine, but still sound good!
Jeff-I have the Berk Test pipes. They are a bit raspy but I like the sound.
#3346
Registered User
iTrader: (25)
Join Date: Oct 2005
Location: Detroit, ATL .
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
highflow cats is a waste of money , test pipes is the way to go, if you want an exhaust with test pipes that doesn't rasp go with the hks hi-power . k&n drop in filter will give you the best results , jwt will give a deeper engine sounds.
#3347
Registered User
iTrader: (7)
Join Date: Mar 2007
Location: Michigan
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
I would use the hfc over the test pipes to get rid of the rasp. I have hear many different claims over the intake. I have the jwt and will be installing it soon. The evo2 exhaust is a awsome system.
#3348
Registered User
i was looking at getting the intense power resonated test pipes.. i have the greddy evo2, i hope it does not get raspy
i need to get my ecu reflashed bad so i can do the 4.083 gears
http://www.intensepower.com/inmorerapi35.html
i need to get my ecu reflashed bad so i can do the 4.083 gears
http://www.intensepower.com/inmorerapi35.html
Last edited by cturnbull802; 04-03-2008 at 02:09 PM.
#3350
Registered User
iTrader: (7)
Join Date: Mar 2007
Location: Michigan
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Yes I have bleed the clutch in a couple of cars before. If you want I can help you this weekend.
Sorry to hear about your issues after all this time. I hope its nothin else wrong.
Sorry to hear about your issues after all this time. I hope its nothin else wrong.
#3351
Registered User
i have a power bleeder for brakes, might work with the clutch i can see if the cap i have fits. it would make it easier. also if anyone is bleeding brakes let me know.
#3352
Registered User
Join Date: Oct 2005
Location: Detroit area Michigan
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cturnbull802
i was looking at getting the intense power resonated test pipes.. i have the greddy evo2, i hope it does not get raspy
i need to get my ecu reflashed bad so i can do the 4.083 gears
http://www.intensepower.com/inmorerapi35.html
i need to get my ecu reflashed bad so i can do the 4.083 gears
http://www.intensepower.com/inmorerapi35.html
I have some UTR resonated test pipes that I am not using. I no longer have a 350z.
I bought them for 340 and am willing to sell them for 250 if you are interested.
They look identical to the intensepower.
#3353
Registered User
Join Date: Oct 2005
Location: Detroit area Michigan
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by D350Z10
Well Got the car back.... but still some fukin issues.... I cant get into any gear and the clutch pedal is sticking to the ground. Sharif says their is air in the system so I have to bleed my clutch.... Have any of you guys done this before??????
OMFG,
That pissed me off and it isnt even my car.
I cant imagine how you feel right now. Espicially after the car being at their shop for what about 7 months.
I would be piiiiiiiiiiiiiiiiiiiiissed.
And yes, I know that it is only a minor issue, but im willing to guess that you are in the top 10 for most money spent on a Z in their shop. You would think that they could bleed the fukin clutch fluid.
#3355
Registered User
iTrader: (25)
Join Date: Oct 2005
Location: Detroit, ATL .
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
lols you don't need a reflash to run the 4.38 grear , it's only give you a few more hundred rpm reflash is a waste of money bro , justsave you money on somethig else .
dil i'm sorry about the car ,but the clutch problem is not that big of a deal though , iknow sharif should have return the car perfectly .
dil i'm sorry about the car ,but the clutch problem is not that big of a deal though , iknow sharif should have return the car perfectly .
#3356
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Cturn-yeah Mike's look the Exact same as those...I wonder if there made by the same Manufacturer??
Dil, sorry bro got your message LATE.
YEs if they removed any clutch lines you'll have to do it.
Its really quite easy to do. Where is the car? If you can't move it then it will need to be done where the car sits.
I would Crucify Sharif if I spent as much as you did and the car did not Run perfect and have a freakin bow attached to it.
http://www.jimwolftechnology.com/wol...TSPECSHEET.pdf
Dil, sorry bro got your message LATE.
YEs if they removed any clutch lines you'll have to do it.
Its really quite easy to do. Where is the car? If you can't move it then it will need to be done where the car sits.
I would Crucify Sharif if I spent as much as you did and the car did not Run perfect and have a freakin bow attached to it.
http://www.jimwolftechnology.com/wol...TSPECSHEET.pdf
Last edited by Datona Jess; 04-04-2008 at 03:02 AM.
#3357
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Saw these, great deal really the tires alone are the cost
http://www.motownmuscle.com/forums/s...ad.php?t=66617
http://www.motownmuscle.com/forums/s...ad.php?t=66617
#3358
Registered User
iTrader: (25)
Join Date: Oct 2005
Location: Detroit, ATL .
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
those test pipes are no where near mike's utr pipes . i bet mike used utr test pipe will outlast the megan racing (tpros , intense)kinda funny when people try to save a few bucks ended up spending more money in the end .