DETROIT Z (meets and events)
#1982
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
AJ: Test pipes on the 370Z 30 minutes to 1 hour depending on rate of consumption of PBR. LOL
Rob:Brake Pads? Not sure if you've done it already or want to wait till the end of the month. 30 minutes / Axle unless we have 1 person per wheel. Then it's 15 minutes.
young Jee(z): Ark Exhaust, Test pipes and bumper tuck 2.5 hours max
- You'll want to get the Copper RTV gasket material in a tube.
- I suggest the right angle O2 sensor non-foulers for the test pipes. Get it on EBay.
- For the tuck, you can go either of two ways.
1) Unbolt the two tabs connecting the valance to the aluminum bumper and move them higher onto the backside of that bumper. this pulls it up but in some case, it can look uneven.
2) Disconnect the tabs and cut them off. Go to Home Depot in the aisle with bolts and buy an aluminum strip of metal about 2' long, 1.8" or so thick and 1/2" wide. Then get a small box of 1/2" long sheet metal screws. Stainless is best but zinc plate will be just fine too. We will end up tucking the bumper and flattening it with the strip. The screws will go through the bumper cover and into the aluminum bumper bar. There is no going back since we will put holes in the bumper. However, it looks hellova lot cleaner than moving the tabs. This is how I did mine.
Brian - Greddy Twin Turbo Kit w/ FMIC .... LMAO! Just kidding.
I have some radius arms and toe bolts to install, CF side skirts to get painted and installed and probably something else too. However, I hope to have those done in the next couple weeks.
You can hang, drink if you want or jump in and turn some wrenches. If you just want to learn how to do something, let us know and I'll be happy to help teach. It's all easy stuff if you really look at it up close.
#1984
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
I am down for any Sunday
Sundays are probably the easiest for people to make it to on a regular basis, and sooner.
We can hangout install some parts and just call it early
If this is all thats being done heck it will only take a few hours total
Sundays are probably the easiest for people to make it to on a regular basis, and sooner.
We can hangout install some parts and just call it early
If this is all thats being done heck it will only take a few hours total
#1985
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
haha Brian how did you know i still had my brake pads to install?
anyways, I'm gonna throw out dates based on my autox schedule since all autox's are on Sundays:
8/16
9/27
all weekend before and in between there's either autox or I'll be out of town.
anyways, I'm gonna throw out dates based on my autox schedule since all autox's are on Sundays:
8/16
9/27
all weekend before and in between there's either autox or I'll be out of town.
#1986
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
8/16 may be a possibility. I really need a fender roller to do the rear. I have spacers and longer studs that need to go in as well.
I'm thinking about joining the Jawbreaker Rally. I'd be out powered my 99% of the cars but I think I stand a chance with my suspension, tire grip and years of driving experience. I expect the overpowered will have a tough time too. It would be the next weekend so the car needs to be ready. Anyone else here thinking about it?
You almost have enough parts to build another car. LOL You should put em in a van and bring them anyway. Maybe you will be able to sell a few.
I'm thinking about joining the Jawbreaker Rally. I'd be out powered my 99% of the cars but I think I stand a chance with my suspension, tire grip and years of driving experience. I expect the overpowered will have a tough time too. It would be the next weekend so the car needs to be ready. Anyone else here thinking about it?
You almost have enough parts to build another car. LOL You should put em in a van and bring them anyway. Maybe you will be able to sell a few.
#1989
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, Ali is coming to hang out in Ann Arbor this Sat night. If anybody else wants to come over and chill you're more than welcome. We'll probably hitup downtown AA and the weekly Sat night meet as well. Brian since ur so close? But I know you got a family and all.
So it looks like 8/16 so far? Let's see when AJ gets his parts.
So it looks like 8/16 so far? Let's see when AJ gets his parts.
#1990
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
8/16 is the day after the dreamcruise and I will still be in Pontiac at the display, helping to tear ti down etc. So I will not be able to make it then.
No big deal on my parts I can put them on myslef in my garage, no biggy
No big deal on my parts I can put them on myslef in my garage, no biggy
#1991
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
I forgot about the Dream Cruise. Looks like August is getting iffy for me anyway. I'm trying to arrange a trip to China. (Ugh!)
What about this Sat or Sunday? Can you guys get parts fast enough?
Possibly. I'll check with the warden to see if I can get out on good behavior. LOL
What about this Sat or Sunday? Can you guys get parts fast enough?
Possibly. I'll check with the warden to see if I can get out on good behavior. LOL
Last edited by Phreakdout; 07-29-2009 at 07:03 AM.
#1992
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
This Sat and Sunday I am booked already, sorry guys.
I was hoping to have my stuff on by the cruise, so I am prob going to have to do it myself, but no big deal..
I wanted someone to take a video of a 370 with open TP's just for fun, but ehh whatever...
I was hoping to have my stuff on by the cruise, so I am prob going to have to do it myself, but no big deal..
I wanted someone to take a video of a 370 with open TP's just for fun, but ehh whatever...
#1994
Registered User
iTrader: (8)
Join Date: Feb 2009
Location: berkley, MI
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
same thing here AJ - let me know when you plan to do the TP install and i can be there. i'd be happy to help. and if you don't have a video camera, i do.
i'd be happy to see how much easier a relatively new car TP install can be vs. the mess i had.
i'd be happy to see how much easier a relatively new car TP install can be vs. the mess i had.
#1996
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys I will let you know
Problem is I am going to see what exhausts come out first.
All the ones so far I don't like the sound of...
I might just out the test pipes on the stock exhaust and see...
Problem is I am going to see what exhausts come out first.
All the ones so far I don't like the sound of...
I might just out the test pipes on the stock exhaust and see...
#1998
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
^^ LOL - My pleasure Scott. I'm sneaky like that.
You know me, I'm a big fan of Greddy's exhaust. They are workingon one but I'm not sure if it's out yet. If not, I'd just TP with OE exhaust. I started that way and then went to Greddy.
#1999
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
comments from today's autox and vid located here:
https://my350z.com/forum/autocross-r...pde-log-2.html
But for you lazy folks who don't want to click:
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/S9w-0GjSCQY&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/S9w-0GjSCQY&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
https://my350z.com/forum/autocross-r...pde-log-2.html
But for you lazy folks who don't want to click:
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/S9w-0GjSCQY&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/S9w-0GjSCQY&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
Last edited by AznSky; 08-02-2009 at 02:18 PM.