DETROIT Z (meets and events)
03-23-2009, 05:39 AM
#1561
Registered User
iTrader: (6)
Join Date: Aug 2008
Location: Farmington Hills, MI
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
OFFICIAL MOD PARTY POST
WHEN: APRIL 4TH
WHERE: Novi, MI (Aj's place)
Install list:
Ansky (Rob)
- Crawford High Flow Cats
- Hotchkis FR/RR Swaybar
- Powergrid Endlinks
- Motordyne Plenum Spacer
Skingy
- Test Pipes
Anybody else? I'll update this post if there is anything else that's feasible.
Don't forget to bring your "going out" clothes as we will probably get dinner and hit up a bar in Novi that night and get those "single white males" (ahem Jon) some females haha.
WHEN: APRIL 4TH
WHERE: Novi, MI (Aj's place)
Install list:
Ansky (Rob)
- Crawford High Flow Cats
- Hotchkis FR/RR Swaybar
- Powergrid Endlinks
- Motordyne Plenum Spacer
Skingy
- Test Pipes
Anybody else? I'll update this post if there is anything else that's feasible.
Don't forget to bring your "going out" clothes as we will probably get dinner and hit up a bar in Novi that night and get those "single white males" (ahem Jon) some females haha.
03-23-2009, 06:38 PM
#1564
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
How to Cancel the Airbag Light that Annoys the Hell out of You
03-24-2009, 03:51 AM
#1566
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
ODEHBOY 50 min. is not far man..........
OFFICIAL MOD PARTY POST
WHEN: APRIL 4TH
WHERE: Novi, MI (Aj's place)
Install list:
Ansky (Rob)
- Crawford High Flow Cats
- Hotchkis FR/RR Swaybar
- Powergrid Endlinks
- Motordyne Plenum Spacer
Skingy
- Test Pipes
lbk16
- Plenum Spacer
Zminus1
- foulers
young Jee(Z)
- Stance Coilovers
For those ppl planning to install plenum spacers, somebody has to make sure they bring a low force torque wrench (like very low ft lbs)
OFFICIAL MOD PARTY POST
WHEN: APRIL 4TH
WHERE: Novi, MI (Aj's place)
Install list:
Ansky (Rob)
- Crawford High Flow Cats
- Hotchkis FR/RR Swaybar
- Powergrid Endlinks
- Motordyne Plenum Spacer
Skingy
- Test Pipes
lbk16
- Plenum Spacer
Zminus1
- foulers
young Jee(Z)
- Stance Coilovers
For those ppl planning to install plenum spacers, somebody has to make sure they bring a low force torque wrench (like very low ft lbs)
03-25-2009, 04:49 AM
#1568
New Member
iTrader: (1)
Join Date: May 2006
Location: somewhere cold
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Somebody bring a torque wrench that does inch-pounds for the plenum bolts as you don't want to over torque them.
I plan on coming over AJ so I can help do some installs... can you PM your address to me?
I plan on coming over AJ so I can help do some installs... can you PM your address to me?
03-25-2009, 05:45 AM
#1570
Registered User
iTrader: (8)
Join Date: Feb 2009
Location: berkley, MI
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
i need your address too... if you could PM it to me, i'd be grateful.
edit: i'll bring an inch-pound torque wrench too. just ordered one from harbor freight... it'll be good to have on hand.
edit: i'll bring an inch-pound torque wrench too. just ordered one from harbor freight... it'll be good to have on hand.
Last edited by skingy; 03-25-2009 at 06:11 AM.
03-25-2009, 09:53 AM
#1572
Registered User
iTrader: (3)
Join Date: Nov 2007
Location: michigan
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
damn, i need to decide what suspension im going to run....quick.
sucks when the school i go to plays a bigger role in my suspension than anything else...the parking lot SUCKS at HFCC.
sucks when the school i go to plays a bigger role in my suspension than anything else...the parking lot SUCKS at HFCC.
03-25-2009, 12:14 PM
#1573
New Member
iTrader: (1)
Join Date: May 2006
Location: somewhere cold
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Try pulling out of where I work..... there's a nice contraption that is a combination of speed bump and spike strip with the huge metal teeth sticking out. On the rare occasion of bringing the car to work I creep over this god damn thing and it sounds like the underbody of my car is rubbing/pushing down the teeth in the spike strip. I cannot find scratches to anything underneath the car but it still pisses me off... guess that's why I don't bring the car to work.?.?
03-25-2009, 07:53 PM
#1574
Registered User
iTrader: (5)
Join Date: Jan 2003
Location: Shelby Twp, Michigan
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Guys, I need some help here. Can't find my owner's manual and I need to know how to rest the window motor or window on the passenger side of my Z.
Put in new motor, new regulator and new switch because the window wasn't working. Well, it rolled down and stuck there. I'm pretty sure its not working because there is a reset function or procedure that I don't know about (ie., hold switch down for X number of seconds then release, etc.). Can anyone help me out or scan me a copy of the pages from the manual? Thanks in advance.
Put in new motor, new regulator and new switch because the window wasn't working. Well, it rolled down and stuck there. I'm pretty sure its not working because there is a reset function or procedure that I don't know about (ie., hold switch down for X number of seconds then release, etc.). Can anyone help me out or scan me a copy of the pages from the manual? Thanks in advance.
03-25-2009, 09:44 PM
#1575
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
Guys, I need some help here. Can't find my owner's manual and I need to know how to rest the window motor or window on the passenger side of my Z.
Put in new motor, new regulator and new switch because the window wasn't working. Well, it rolled down and stuck there. I'm pretty sure its not working because there is a reset function or procedure that I don't know about (ie., hold switch down for X number of seconds then release, etc.). Can anyone help me out or scan me a copy of the pages from the manual? Thanks in advance.
Put in new motor, new regulator and new switch because the window wasn't working. Well, it rolled down and stuck there. I'm pretty sure its not working because there is a reset function or procedure that I don't know about (ie., hold switch down for X number of seconds then release, etc.). Can anyone help me out or scan me a copy of the pages from the manual? Thanks in advance.
Bookmark this page:
Full service Manual online
The start of the glass and window section is here:
http://www.myzroadster.com/files/200...0manual/GW.pdf
Last edited by Phreakdout; 03-25-2009 at 09:50 PM.
03-26-2009, 04:44 AM
#1576
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Novi, Michigan
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Phreak, that is awesome!
Did not know that was out there, I have bookmarked it myself.
Saw the weather for the mod party in the 10 day forecast
Says Sunny and 50 so that is good news, though in the AM it might be a hair chilly while we are working. Does anyone have some rubbing compound they can bring to the party?
Jess had a small runin in the G and I am hoping to buff it out.
Did not know that was out there, I have bookmarked it myself.
Saw the weather for the mod party in the 10 day forecast
Says Sunny and 50 so that is good news, though in the AM it might be a hair chilly while we are working. Does anyone have some rubbing compound they can bring to the party?
Jess had a small runin in the G and I am hoping to buff it out.
03-26-2009, 05:06 AM
#1577
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
Phreak, that is awesome!
Did not know that was out there, I have bookmarked it myself.
Saw the weather for the mod party in the 10 day forecast
Says Sunny and 50 so that is good news, though in the AM it might be a hair chilly while we are working. Does anyone have some rubbing compound they can bring to the party?
Jess had a small runin in the G and I am hoping to buff it out.
Did not know that was out there, I have bookmarked it myself.
Saw the weather for the mod party in the 10 day forecast
Says Sunny and 50 so that is good news, though in the AM it might be a hair chilly while we are working. Does anyone have some rubbing compound they can bring to the party?
Jess had a small runin in the G and I am hoping to buff it out.
Ordering more parts today!!
03-26-2009, 07:00 AM
#1578
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
OFFICIAL MOD PARTY POST
WHEN: APRIL 4TH
WHERE: Novi, MI (Aj's place)
Install list:
Ansky (Rob)
- Crawford High Flow Cats
- Hotchkis FR/RR Swaybar
- Powergrid Endlinks
- Motordyne Plenum Spacer
Skingy
- Test Pipes
lbk16
- Plenum Spacer
Zminus1
- foulers
young Jee(Z)
- Stance Coilovers
amsyed84
- JWT PopCharger
Thanks skingy for bringing the in-lb torque wrench. That's exactly what we'll need.
Also just remembered, AJ's driveway is a little hight (to me, but not to him lol). But for any of you who have lowered cars (or plan on lowering your cars). It might not be a bad idea to bring some 2x4's as ramps or something. Unless you have something already AJ. I think I might have some at home too, i can check.
I'm excited!!!!!!
WHEN: APRIL 4TH
WHERE: Novi, MI (Aj's place)
Install list:
Ansky (Rob)
- Crawford High Flow Cats
- Hotchkis FR/RR Swaybar
- Powergrid Endlinks
- Motordyne Plenum Spacer
Skingy
- Test Pipes
lbk16
- Plenum Spacer
Zminus1
- foulers
young Jee(Z)
- Stance Coilovers
amsyed84
- JWT PopCharger
Thanks skingy for bringing the in-lb torque wrench. That's exactly what we'll need.
Also just remembered, AJ's driveway is a little hight (to me, but not to him lol). But for any of you who have lowered cars (or plan on lowering your cars). It might not be a bad idea to bring some 2x4's as ramps or something. Unless you have something already AJ. I think I might have some at home too, i can check.
I'm excited!!!!!!
03-26-2009, 11:47 AM
#1579
Registered User
iTrader: (5)
Join Date: Jan 2003
Location: Shelby Twp, Michigan
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Bookmark this page:Full service Manual online
The start of the glass and window section is here:
http://www.myzroadster.com/files/200...0manual/GW.pdf
