Minnesota Chat Thread
New Member
iTrader: (3)
The boss comes up to me and says I have to go home early cause I've accumulated to much OT in two weeks when we're not supposed to have any at this time. Don't have to tell me twice!!! I'm outta here..
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
Exit, stage left! lol
So I am shopping for a rear sight aperture since my Remington 597 .22LR doesn't have one. WTF...
Maybe I should buy the tactical kit for the gun.
Edit: got a 9x scope, just need to find a riser or something. It sits too low for the rifle.
So I am shopping for a rear sight aperture since my Remington 597 .22LR doesn't have one. WTF...
Maybe I should buy the tactical kit for the gun.
Edit: got a 9x scope, just need to find a riser or something. It sits too low for the rifle.
Last edited by SmoothZ; 04-04-2014 at 05:04 PM.
Registered User
iTrader: (1)
Well Gents, I'm back, and now the proud owner of a 2008 Base 350z!
pics: https://imgur.com/a/JjuN6
That stupid spoiler had to go.
I was a but surprised when I got there to find it's sitting on coil overs. I knew it was a bit low, but i assumed it was at best some springs.
I managed to get 10 min on a lift today, and got an inspection done. The coil-over units are stance, so.. not great. It's also got some camber arms and toe arms in the rear. I knew about the borla exhaust, but didn't know it was missing a clamp.. That explains some of the drone on the way home.
Unfortunately, i already bought a set of SPC camber arms, and I need stock toe arms for the setup I'm going to run.
Anyone want some rear end alignment parts? or a stupid spoiler?
pics: https://imgur.com/a/JjuN6
That stupid spoiler had to go.
I was a but surprised when I got there to find it's sitting on coil overs. I knew it was a bit low, but i assumed it was at best some springs.
I managed to get 10 min on a lift today, and got an inspection done. The coil-over units are stance, so.. not great. It's also got some camber arms and toe arms in the rear. I knew about the borla exhaust, but didn't know it was missing a clamp.. That explains some of the drone on the way home.
Unfortunately, i already bought a set of SPC camber arms, and I need stock toe arms for the setup I'm going to run.
Anyone want some rear end alignment parts? or a stupid spoiler?
New Member
iTrader: (3)
Well Gents, I'm back, and now the proud owner of a 2008 Base 350z!
pics: https://imgur.com/a/JjuN6
That stupid spoiler had to go.
I was a but surprised when I got there to find it's sitting on coil overs. I knew it was a bit low, but i assumed it was at best some springs.
I managed to get 10 min on a lift today, and got an inspection done. The coil-over units are stance, so.. not great. It's also got some camber arms and toe arms in the rear. I knew about the borla exhaust, but didn't know it was missing a clamp.. That explains some of the drone on the way home.
Unfortunately, i already bought a set of SPC camber arms, and I need stock toe arms for the setup I'm going to run.
Anyone want some rear end alignment parts? or a stupid spoiler?
pics: https://imgur.com/a/JjuN6
That stupid spoiler had to go.
I was a but surprised when I got there to find it's sitting on coil overs. I knew it was a bit low, but i assumed it was at best some springs.
I managed to get 10 min on a lift today, and got an inspection done. The coil-over units are stance, so.. not great. It's also got some camber arms and toe arms in the rear. I knew about the borla exhaust, but didn't know it was missing a clamp.. That explains some of the drone on the way home.
Unfortunately, i already bought a set of SPC camber arms, and I need stock toe arms for the setup I'm going to run.
Anyone want some rear end alignment parts? or a stupid spoiler?
Lead Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (1)
Registered User
iTrader: (1)
It desperately needs an LSD.. Right now, i'm torn between a Nismo or an OS Geiken. It's just rounding up that $1500+ for a good diff.
But I need my hood.. it keeps my engine dry, sometimes.
You can have the spoiler for free.. I'm gonna need some cash or trades for the other bits
But I need my hood.. it keeps my engine dry, sometimes.
You can have the spoiler for free.. I'm gonna need some cash or trades for the other bits
Lead Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (1)
New Member
iTrader: (3)
It desperately needs an LSD.. Right now, i'm torn between a Nismo or an OS Geiken. It's just rounding up that $1500+ for a good diff.
But I need my hood.. it keeps my engine dry, sometimes.
You can have the spoiler for free.. I'm gonna need some cash or trades for the other bits
But I need my hood.. it keeps my engine dry, sometimes.
You can have the spoiler for free.. I'm gonna need some cash or trades for the other bits
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
Damn, that's a nice Z. I can't believe how little he's asking for it.
Did someone say free parts? lol
What kind of spoiler was it?
Did someone say free parts? lol
What kind of spoiler was it?
Registered User
iTrader: (1)
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
How much HP does this car have? It's NA right?
Registered User
iTrader: (1)
... Cheap.. not free
But some trades could be arranged.. I need some stock toe arms (Spring buckets) to replace the aftermarket ones. Not allowed to change the spring mounting point in the rule set.
I have no idea who made the rear spoiler..
it looks like this one: http://www.ebay.com/itm/03-08-Nissan-350Z-Stillen-Street-Scene-Urethane-Rear-Window-Roof-Spoiler-Wing-/321093688847?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A350Z&hash=item4ac2acde0f&vxp=mtr
And that would be free... i don't care what happens to that thing..
But some trades could be arranged.. I need some stock toe arms (Spring buckets) to replace the aftermarket ones. Not allowed to change the spring mounting point in the rule set.
I have no idea who made the rear spoiler..
it looks like this one: http://www.ebay.com/itm/03-08-Nissan-350Z-Stillen-Street-Scene-Urethane-Rear-Window-Roof-Spoiler-Wing-/321093688847?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A350Z&hash=item4ac2acde0f&vxp=mtr
And that would be free... i don't care what happens to that thing..
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
Ew, kill that thing! lol
Sorry, I have no parts to trade with you. I actually have the OEM strut brace and sway bars, but that's it.
Sorry, I have no parts to trade with you. I actually have the OEM strut brace and sway bars, but that's it.
Registered User
iTrader: (1)
It's stock except for that Borla exhaust.. Still, 306hp rated is nothing to scoff at.
I signed the papers, Walked out of the dealership, put my bag in the car, took a picture, then ripped it off and threw it in the back.
It's in my storage garage never to be mounted to my car again.
I signed the papers, Walked out of the dealership, put my bag in the car, took a picture, then ripped it off and threw it in the back.
It's in my storage garage never to be mounted to my car again.
Lead Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (1)