my little build
Thread Starter
Registered User
iTrader: (8)
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
Thread Starter
Registered User
iTrader: (8)
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
motor blows chunks
puts a rod through the block (complete new block, not just rebuild)
at the same time the piston comes into contact with a valve or 2, now you have a bunch of projectiles flying around in your combustion chamber, destroying your head (now you need new heads as well)
some of those projectiles get out of the engine and makes its way to your new gt35r turbo, now you need a new turbo
so worse case, your looking at a completely new longblock, and a new turbo, plus a bunch of other little stuff...
if i were in your shoe's, i'd back down to 8-9 psi and save up for a forged bottom end, then turn up the boost once you have that...
Thread Starter
Registered User
iTrader: (8)
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
well if you're looking for the worst, here's my take on worst that can happen:
motor blows chunks
puts a rod through the block (complete new block, not just rebuild)
at the same time the piston comes into contact with a valve or 2, now you have a bunch of projectiles flying around in your combustion chamber, destroying your head (now you need new heads as well)
some of those projectiles get out of the engine and makes its way to your new gt35r turbo, now you need a new turbo
so worse case, your looking at a completely new longblock, and a new turbo, plus a bunch of other little stuff...
if i were in your shoe's, i'd back down to 8-9 psi and save up for a forged bottom end, then turn up the boost once you have that...
motor blows chunks
puts a rod through the block (complete new block, not just rebuild)
at the same time the piston comes into contact with a valve or 2, now you have a bunch of projectiles flying around in your combustion chamber, destroying your head (now you need new heads as well)
some of those projectiles get out of the engine and makes its way to your new gt35r turbo, now you need a new turbo
so worse case, your looking at a completely new longblock, and a new turbo, plus a bunch of other little stuff...
if i were in your shoe's, i'd back down to 8-9 psi and save up for a forged bottom end, then turn up the boost once you have that...
as for the turbo...that could be shitty...but thats a chance ill take...11 psi is so much fun...
you only live once right??? ill just be everyones ginny pig haha
Thread Starter
Registered User
iTrader: (8)
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
i really dont think its going to blow anytime soon...maybe after a year or so of HARD driving....but as of right now...i think its going to last quite a while
ill proly just wait till i get bored of this power then go ahead and buy the new stuff...plus if i do it when i have a good motor still, i think gtm will buy my old motor?...i donno for sure tho
Thread Starter
Registered User
iTrader: (8)
Joined: Oct 2007
Posts: 1,036
Likes: 1
From: Coraopolis, Pa
i wana go...i was thinking about friday...but i wana get my LSD in first and iv been really lazy haha
but as for the 19....F**K YOU! haha i have nothing more to say ahha
but as for the 19....F**K YOU! haha i have nothing more to say ahha
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM
Tochigi_236
Feedback & Suggestions for Our Forum
8
Sep 27, 2015 03:40 PM



Definitely wont be messing with that car any time soon.
