3.5L + Headwork, APS Extreme G35
Thread Starter
Registered User
iTrader: (19)
Joined: Feb 2005
Posts: 963
Likes: 0
From: Indianapolis
3.5L + Headwork, APS Extreme G35
Not really a shop build but I figured I would post it in here anyways
I spent the last 8 months or so putting my car together, me and 2 friends pulled the engine out and tore it apart. i drove my core to Forged to pick up the shortblock then assembled the longblock in my garage and dropped it in. The car ran a 12.3 @113 last year with the vortech on a stock block, I wanted to build a car that could hit 130 ish traps and have the ability to hit 10s on a bias ply tire but still have the a/c, cruise control, and navigation all work.
Here are the specs
APS Extreme TT
Forged Performance S1 Shortblock
Ported and Polished Heads
ARP L19 Headstuds
HKS Headgaskets
Ferrea +1mm Valves, springs, titanium retainers
GTM Turbo Cams
Haltech Platinum
Innovate LC1 Dual Channel Widebands
GTM Spec Exedy Triple Carbon Clutch
CJM Stage 1
HKS 1000CC Injectors
Greddy Evo TT Exhaust
Koyo R Core Radiator
Evans NPG+
Rear Coolant Bypass
assortment of Defi Gauges
Engine Out
Forged S1 Shortblock + L19s
New Heads
Port + Polish
Turbo Kit mock up
GTM Clutch
And here is the low boost tune, conservative timing, 93 octane, 15.4 psi Tuned by Hal @ Injected Performance. I ran out of fuel pump @ 568 Whp so Hal took it down a step to 550 RWHP
Extra special shout out to Sharif and Sandy at Forged for all the PM's and phone calls they had to respond to and for Hal @ injected for putting in some serious hours on my basketcase of a car
Stay tuned for 22 psi + Meth Injection
I spent the last 8 months or so putting my car together, me and 2 friends pulled the engine out and tore it apart. i drove my core to Forged to pick up the shortblock then assembled the longblock in my garage and dropped it in. The car ran a 12.3 @113 last year with the vortech on a stock block, I wanted to build a car that could hit 130 ish traps and have the ability to hit 10s on a bias ply tire but still have the a/c, cruise control, and navigation all work.
Here are the specs
APS Extreme TT
Forged Performance S1 Shortblock
Ported and Polished Heads
ARP L19 Headstuds
HKS Headgaskets
Ferrea +1mm Valves, springs, titanium retainers
GTM Turbo Cams
Haltech Platinum
Innovate LC1 Dual Channel Widebands
GTM Spec Exedy Triple Carbon Clutch
CJM Stage 1
HKS 1000CC Injectors
Greddy Evo TT Exhaust
Koyo R Core Radiator
Evans NPG+
Rear Coolant Bypass
assortment of Defi Gauges
Engine Out
Forged S1 Shortblock + L19s
New Heads
Port + Polish
Turbo Kit mock up
GTM Clutch
And here is the low boost tune, conservative timing, 93 octane, 15.4 psi Tuned by Hal @ Injected Performance. I ran out of fuel pump @ 568 Whp so Hal took it down a step to 550 RWHP
Extra special shout out to Sharif and Sandy at Forged for all the PM's and phone calls they had to respond to and for Hal @ injected for putting in some serious hours on my basketcase of a car
Stay tuned for 22 psi + Meth Injection
Trending Topics
those are some sick numbers..
word of advice.. read carefully on those rim cleaners at the auto parts stores.. i wasn't paying much attention.. used one and fcked up my chrome lip.. now it has some blueish color
word of advice.. read carefully on those rim cleaners at the auto parts stores.. i wasn't paying much attention.. used one and fcked up my chrome lip.. now it has some blueish color
Thanks for stopping by on your way home.
