The Build BEGINS! Gamermodz/GReddy/S&R Z goes under the knife!
#143
Registered User
Join Date: Dec 2010
Location: Alpharetta, GA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys this is Doug from TopSpeed.
Just wanted to make a comment about those saying this car is laggy.
Its a common misconception when looking at high hp graphs that the car is laggy. It just appears to be laggy because of the high hp numbers being shifted to the right of the powerband. What everyone doesn't notice is that this car is making over 300ft/lbs of tq at 4k rpms, and over 500ft/lbs by 5k. Giving you a huge power band since the rev limiter is set at 8200rpms.
Just to show everyone what I am trying to say here is the Gamermodz 350's dynograph overlayed with a mild bolt on 350z. Notice that above 2800rpms the car is making more power.
Which one would you rather drive
Doug
Just wanted to make a comment about those saying this car is laggy.
Its a common misconception when looking at high hp graphs that the car is laggy. It just appears to be laggy because of the high hp numbers being shifted to the right of the powerband. What everyone doesn't notice is that this car is making over 300ft/lbs of tq at 4k rpms, and over 500ft/lbs by 5k. Giving you a huge power band since the rev limiter is set at 8200rpms.
Just to show everyone what I am trying to say here is the Gamermodz 350's dynograph overlayed with a mild bolt on 350z. Notice that above 2800rpms the car is making more power.
Which one would you rather drive
Doug
#145
Vendor - Former Vendor
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: Tampa
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys this is Doug from TopSpeed.
Just wanted to make a comment about those saying this car is laggy.
Its a common misconception when looking at high hp graphs that the car is laggy. It just appears to be laggy because of the high hp numbers being shifted to the right of the powerband. What everyone doesn't notice is that this car is making over 300ft/lbs of tq at 4k rpms, and over 500ft/lbs by 5k. Giving you a huge power band since the rev limiter is set at 8200rpms.
Just to show everyone what I am trying to say here is the Gamermodz 350's dynograph overlayed with a mild bolt on 350z. Notice that above 2800rpms the car is making more power.
Which one would you rather drive
Doug
Just wanted to make a comment about those saying this car is laggy.
Its a common misconception when looking at high hp graphs that the car is laggy. It just appears to be laggy because of the high hp numbers being shifted to the right of the powerband. What everyone doesn't notice is that this car is making over 300ft/lbs of tq at 4k rpms, and over 500ft/lbs by 5k. Giving you a huge power band since the rev limiter is set at 8200rpms.
Just to show everyone what I am trying to say here is the Gamermodz 350's dynograph overlayed with a mild bolt on 350z. Notice that above 2800rpms the car is making more power.
Which one would you rather drive
Doug
#147
New Member
iTrader: (1)
Silly noob question, but how are you gonna transfer that much power to the ground? I see the modded G diff - what are the details? Is it LS or welded? And what tires do you plan to run for track and street?
I would imagine that past a certain WHP number, any additional power is useless on a 2wd chassis unless it's heavily modded. Any plans or considerations for an AWD setup?
Congrats on an awesome feat of engineering regardless.
I would imagine that past a certain WHP number, any additional power is useless on a 2wd chassis unless it's heavily modded. Any plans or considerations for an AWD setup?
Congrats on an awesome feat of engineering regardless.
#148
New Member
iTrader: (11)
Hey Doug, 300ft-lbs at 4000 rpms is laggy with a 4.2L and crazy heads!!! You are not comparing apple to apples.
typical 4.0L strokers with 60-1 sized turbos are making 500-600 ft-lbs at 4000rpms.
typical 4.0L strokers with 60-1 sized turbos are making 500-600 ft-lbs at 4000rpms.
Hey guys this is Doug from TopSpeed.
Just wanted to make a comment about those saying this car is laggy.
Its a common misconception when looking at high hp graphs that the car is laggy. It just appears to be laggy because of the high hp numbers being shifted to the right of the powerband. What everyone doesn't notice is that this car is making over 300ft/lbs of tq at 4k rpms, and over 500ft/lbs by 5k. Giving you a huge power band since the rev limiter is set at 8200rpms.
Just to show everyone what I am trying to say here is the Gamermodz 350's dynograph overlayed with a mild bolt on 350z. Notice that above 2800rpms the car is making more power.
Which one would you rather drive
Doug
Just wanted to make a comment about those saying this car is laggy.
Its a common misconception when looking at high hp graphs that the car is laggy. It just appears to be laggy because of the high hp numbers being shifted to the right of the powerband. What everyone doesn't notice is that this car is making over 300ft/lbs of tq at 4k rpms, and over 500ft/lbs by 5k. Giving you a huge power band since the rev limiter is set at 8200rpms.
Just to show everyone what I am trying to say here is the Gamermodz 350's dynograph overlayed with a mild bolt on 350z. Notice that above 2800rpms the car is making more power.
Which one would you rather drive
Doug
Last edited by str8dum1; 12-29-2010 at 10:02 AM.
#149
Registered User
iTrader: (10)
Silly noob question, but how are you gonna transfer that much power to the ground? I see the modded G diff - what are the details? Is it LS or welded? And what tires do you plan to run for track and street?
I would imagine that past a certain WHP number, any additional power is useless on a 2wd chassis unless it's heavily modded. Any plans or considerations for an AWD setup?
Congrats on an awesome feat of engineering regardless.
I would imagine that past a certain WHP number, any additional power is useless on a 2wd chassis unless it's heavily modded. Any plans or considerations for an AWD setup?
Congrats on an awesome feat of engineering regardless.
#151
New Member
iTrader: (11)
there's nothing wrong with laggy, I guess I was just surprised that smaller turbos, +20% more displacement, and 37% more flow in the heads didnt left shift that curve much at all compared to 3.5L high powered cars (Sound performance, Injected, myself...)
Being a time attack car, I wouldnt think you'd want such and on/off power sweep inside a few hundred rpms.
Being a time attack car, I wouldnt think you'd want such and on/off power sweep inside a few hundred rpms.
Last edited by str8dum1; 12-29-2010 at 10:12 AM.
#153
350Z-holic
iTrader: (25)
there's nothing wrong with laggy, I guess I was just surprised that smaller turbos, +20% more displacement, and 37% more flow in the heads didnt left shift that curve much at all compared to 3.5L high powered cars (Sound performance, Injected, myself...)
Being a time attack car, I wouldnt think you'd want such and on/off power sweep inside a few hundred rpms.
Being a time attack car, I wouldnt think you'd want such and on/off power sweep inside a few hundred rpms.
#155
Registered User
every time I see a thread with a dyno like this and the owner/shop promises that they have a trick that they haven't employed yet to shift the curve to the left and speed the spool up it never seems to materialize. That annoys me.
#157
Registered User
iTrader: (2)
Join Date: Jul 2008
Location: Alabama
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Mod List as of right now!
Motor:
VQ35HR Stroked to 4.2L
Greddy Twin Turbos (Two 20G Turbos with larger compressor wheels) Ported & Polished
CP Pistons
Brian Crower Rods
Brian Crower Billet Crank
Ferrea 2mm over sized competition valves, springs and titanium retainers
Ported, Polished and Reflowed Heads (Flowed 37% more than stock)
Engine completely balanced and blueprinted
Tomei Pro Cams
Block sleeved by Darton
Custom Designed 6061 T6 Aluminum Twin Throttlebody Plenum
All components have been Cryogenically treated in an SubZero Cryo unit
1600cc Injectors
#159
Registered User