Notices
2003-2009 Nissan 350Z

03 350z touring no start, fuel pump good

Thread Tools
 
Search this Thread
 
Old May 15, 2018 | 02:18 PM
  #1  
Njohnson2294's Avatar
Njohnson2294
Thread Starter
New Member
 
Joined: Jul 2016
Posts: 11
Likes: 0
From: Cleveland, Ohio
Default 03 350z touring no start, fuel pump good

I was hoping someone could help me out. I have a 03 350z touring. It currently cranks but will not start. Getting spark, and fuel pump is good and working, but will not start. I can only get it to start and run shortly with starting fluid, but once I cut the fluid it dies back out. Anyone have this problem before or can shed some light in the situation? Any help is much appreciated.
Reply
Old May 15, 2018 | 10:15 PM
  #2  
Kevin Skene's Avatar
Kevin Skene
New Member
 
Joined: Dec 2017
Posts: 237
Likes: 29
From: Los Angeles
Default

Originally Posted by Njohnson2294
I was hoping someone could help me out. I have a 03 350z touring. It currently cranks but will not start. Getting spark, and fuel pump is good and working, but will not start. I can only get it to start and run shortly with starting fluid, but once I cut the fluid it dies back out. Anyone have this problem before or can shed some light in the situation? Any help is much appreciated.
Codes? Done any work on it recently?
Reply
Old May 16, 2018 | 04:09 PM
  #3  
Njohnson2294's Avatar
Njohnson2294
Thread Starter
New Member
 
Joined: Jul 2016
Posts: 11
Likes: 0
From: Cleveland, Ohio
Default No start

Only body work. Throwing a P1615 code.
Reply
Old May 16, 2018 | 04:13 PM
  #4  
dboyzalter's Avatar
dboyzalter
6 inch cawk is my fave!
iTrader: (3)
 
Joined: Apr 2015
Posts: 6,556
Likes: 973
From: Mass
Default

Did you run out of gas?

If it starts with starting fluid, its not getting gas injected into the cylinders.
Reply
Old May 16, 2018 | 04:20 PM
  #5  
tmdz's Avatar
tmdz
New Member
 
Joined: Sep 2017
Posts: 222
Likes: 40
From: WA State
Default

P1615 NISSAN - NVIS Difference of Key

Possible causes

  • Faulty or not programmed ignition key
  • Faulty IMMU
  • Faulty Engine Control Module (ECM)
What does this mean?

Tech notes

This code is usually triggered when a not registered or damaged key is used to start the engine. When the starting operation is carried out five or more times consecutively with the same unregistered key, the system will lock.

If the problem occurs try disconnecting the car battery for about 30 minutes and then try starting the engine with a known registered key. If the problem persists you have to have the dealer erase the code and reprogram the keys again.
What does this mean?

When is the code detected?

IMMU can receive the key ID signal but the result of ID verification between key ID and IMMU is not good.

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine would not start

P1615 Nissan Description

An immobilizer is an electronic device fitted to an automobile which prevents the engine from running unless the correct key is present. This prevents the car from being hotwired after entry has been achieved.

The microcircuit inside the key is activated by a small electromagnetic field which induces current to flow inside the key body, which in turn broadcasts a unique binary code which is read by the automobile's Engine Control Module (ECM). When the ECM determines that the coded key is both current and valid, the ECM activates the fuel-injection sequence.

The immobilizer function of the Infiniti Vehicle Immobilizer System (IVIS) or Nissan Anti-Theft System (NATS) consists of the following:

- NATS ignition key

- NATS antenna amp. located in the ignition key cylinder

- Body control module (BCM) or (IMMU)

- Engine Control Module (ECM)

- Security indicator lamp


Reply
Old May 16, 2018 | 04:20 PM
  #6  
tmdz's Avatar
tmdz
New Member
 
Joined: Sep 2017
Posts: 222
Likes: 40
From: WA State
Default

Double post - My phone hates this site.

Last edited by tmdz; May 17, 2018 at 11:59 AM. Reason: Double post - Sry
Reply
Old May 17, 2018 | 05:11 AM
  #7  
Dr. Venture's Avatar
Dr. Venture
Registered User
iTrader: (19)
 
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
Default

I would have said bad Cam Sensor/s but if you get this code it's the KEY losing communication and the vehicle assuming it's being robbed.....Shutting down Fuel. Perform "key reprogramming"

Unforn unlike the FOb there is no way to program w/o the use of a scan tool.

Last edited by Dr. Venture; May 17, 2018 at 05:15 AM.
Reply
Old Jun 30, 2018 | 11:03 PM
  #8  
Micheal Wilds's Avatar
Micheal Wilds
Registered User
 
Joined: Nov 2017
Posts: 7
Likes: 0
From: Indiana
Default

Thanking maybe im having this problem but im not throwing any codes yet, mines just cranks and cranks guessing maybe my injectors quit?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ccchaorule
Forced Induction
16
Jan 9, 2012 09:23 AM
Chris@DW
Forced Induction
8
Jun 14, 2011 09:11 AM




All times are GMT -8. The time now is 12:33 PM.