very kewl....keep us 37 guys posted!

 

Any Word on the HR Stuff Yet

 

Man, some of you guys are ruthless. Cheston just posted a few hours ago that the reflash for the HR was in development.

Hang on guys. I have a feeling that something is coming very soon.

 

07 VQHR base model Z done.. (well.. 99% done with the code..)

Torque gains throughout the entire torque band..GOOD low to midrange torque (~approx 14 ft-lb gains at around 3500-5k rpm), fairly nice high end torque increase (~9 ft-lb at. 6k+), and redline is now at 8k for lead foots..

VERY consitent power increase throughout the entire RPM bands, overall peak power are approx 9-10 rwhp, with gains up to 11+ at 5500.

good stable AFRs throughout.

interesting throttle body control on the VQHRs... very different than the non HRs. should be very interesting for those in racing applications. on a test at freeway speeds. if you floor it, the car 'launched forward'. the retail version will be more tame and controllable, but for those that want the on/off feeling. we can now do it. heheh.

as a side note. if you have 93+ octane, Tadashi created a special map that actually gained 17+ rwhp due to advancement in timing, but thanks to our crappy gas in CA, would ping sometimes.. we saved the settings, so maybe with a little bit of refinement on that code. those that have better gas can have even more power.

all these numbers i am quoting are from the prototype on an 07VQHR Base model..., actual gains may vary from case to case. but these are very promising.

stay tuned as we get more models in (enthusiast, track, etc)..
for those that i emailed before for prototyping. its go time baby.

we also now have the NISMO edition Z33 engine code from Japan.. those with US spec Nismo Zs.. we still want to test on your car..
--cheston

 

check u pm

 

how far off till we see a reflash for the VQ37HR? i only persist so much because Tadashi worked very well on my car.

 

G37 test car is sending us their ECU within a week.
we'll have the dyno test mule probably before end of the year.

probably have the G37S (stick) done by new year. (give or take a week)

we need a G35Sedan STICK.. volunteer still tho..

 

great work technosquare and cheston the ever-important liaison

 

hey I pm you before. My car is instorage now and I can send you the ecu ifyou like. I have an 07 enthusiast 6speed + some mods

 

Sounds good. chk ur pm.

 

i cant wait o my goodness

 

Yeah, go guys!

 

OMG!

 

17whp with 93 octane on stock motor???? Can't wait!!!

 

WOW! I can't wait to get this!

 

Any idea on how much the reflash is gonna cost and turnaround time when the product is fully released? Will there be any physically noticeable alterations to the ecu if in case we had to bring the vehicle in for warranty at the dealership? Also any warranty if the ECU fries?

 

full release typically, turn around time is typically same day Techno Receives it.

so if on a monday. you send fex ex for a Tuesday 10am delivery. on Tuesday, Techno receives ECU, is reflashed and sent out that day for next day air fedex, you should get your ECU back by Wednesday.

money back guarantee on all reflashes. free ground shipping on all ECU reprogramming. see their new ad in Modified and Sport Compact Car.

for more info: www.technosquareinc.com

 

So when can we start buying the reflash? My car is in the shop for the next two weeks and would love to get this done.

 

i'll post info asap on when it'll be publically available.

 

yay...another xmas present lol