Notices

FS: Complete Z Part-out! OEM and Aftermarket

Thread Tools
 
Search this Thread
 
Old Jun 15, 2015 | 01:32 PM
  #1  
kyamcg's Avatar
kyamcg
Thread Starter
Registered User
iTrader: (2)
 
Joined: Jun 2013
Posts: 25
Likes: 0
From: Columbus
Default Complete Z Part-out! OEM and Aftermarket

Over the last year I've parted two 350Zs, and these are some of the extra parts I've got. I tried to price everything less than what I could find them for anywhere else, and I'll also do bundle deals.
All parts are from a VQ35DE unless otherwise noted.
The prices posted are for picked up in Columbus, Ohio.

CLICK HERE FOR PHOTOS.
There are ~40 large photos, so I don't want to post them directly here and blow

Aftermarket
Takeda Intake - $150
OBX Dual catback exhaust - $300
BLOX Plenum spacer - $50

OEM
Engine
Coil packs - $50 for all
Dipstick - $10
Upper Plenum - $50
Lower Plenum - $30
Intake runners - $30
Lower oil pan - $10
Upper oil pan - $40
Power Steering pump (two available) - $30
Alternator (two available) - $30
Motor mount brackets (each) - $10
Fuel rails – $10
VQ35DE OEM injectors (six) - $50
VQ35HR injectors (six) - $50


Interior
Driver door card (black) - $60
Passenger door card (black) - $60

Exterior

Passenger side mirror (entire assembly) - $50


Misc
ABS pump module - $20
Brake booster - $20
Pedal assemblies without sensors - $10
HID ballasts and igniters (pair) - $60
Wiper assembly - $30
Driver window switch - $50
Passenger window switch - $25
Mirror switch - $20
Gas lid - $20



*These are just the items that were easily accessible to take pictures of. I've also got an entire black interior (carpet, seats, plastics), extra doors, hoods, wiring harrnesses, a hatch, subframes, etc. If you don't see it listed above but think I may have it, just shoot me a PM and I'll post that item up next.

Last edited by kyamcg; Jun 26, 2015 at 06:54 AM.
Reply
Old Jun 15, 2015 | 09:59 PM
  #2  
NoQuestionZ's Avatar
NoQuestionZ
New Member
iTrader: (93)
 
Joined: Feb 2010
Posts: 4,925
Likes: 27
From: KCMO
Default

I can't see the pictures at work... Are the "pedal assemblies w/o sensors" the whole pedal? If so are they the silver pedal covers? Or am I way off on what you're selling?
Reply
Old Jun 16, 2015 | 04:02 AM
  #3  
kyamcg's Avatar
kyamcg
Thread Starter
Registered User
iTrader: (2)
 
Joined: Jun 2013
Posts: 25
Likes: 0
From: Columbus
Default

Originally Posted by NoQuestionZ
I can't see the pictures at work... Are the "pedal assemblies w/o sensors" the whole pedal? If so are they the silver pedal covers? Or am I way off on what you're selling?
Yes, they're the whole pedals from the pad you out your foot on to the bracket that bolts to the firewall. They're from a 2007 Base model so they are the black covers instead of the silver ones.
Reply
Old Jun 17, 2015 | 04:48 AM
  #4  
kyamcg's Avatar
kyamcg
Thread Starter
Registered User
iTrader: (2)
 
Joined: Jun 2013
Posts: 25
Likes: 0
From: Columbus
Default

PMs replied, original post updated with which parts have sold
Reply
Old Jun 17, 2015 | 07:53 PM
  #5  
NoQuestionZ's Avatar
NoQuestionZ
New Member
iTrader: (93)
 
Joined: Feb 2010
Posts: 4,925
Likes: 27
From: KCMO
Default

Originally Posted by kyamcg
Yes, they're the whole pedals from the pad you out your foot on to the bracket that bolts to the firewall. They're from a 2007 Base model so they are the black covers instead of the silver ones.
I haz base model too. GLWS!!!
Reply
Old Jun 26, 2015 | 06:52 AM
  #6  
kyamcg's Avatar
kyamcg
Thread Starter
Registered User
iTrader: (2)
 
Joined: Jun 2013
Posts: 25
Likes: 0
From: Columbus
Default

Bump it up!

Original post edited to remove sold items

Last edited by kyamcg; Jun 26, 2015 at 06:54 AM.
Reply
Old Sep 11, 2015 | 06:00 AM
  #7  
kyamcg's Avatar
kyamcg
Thread Starter
Registered User
iTrader: (2)
 
Joined: Jun 2013
Posts: 25
Likes: 0
From: Columbus
Default

Bumping it back up.
I have an entire Z that I just took the body from; which means I have way more parts than just those pictured.
Another set of mirrors
black interior plastics
VQ35DE block
VQ35DE heads
6mt Swap (transmission, LSD, driveshaft, clutch pedal and assembly)
Entire rear subframe and suspension

If anyone needs any parts, message me and chances are I've got them.
Reply
Old Sep 11, 2015 | 08:01 AM
  #8  
jhc's Avatar
jhc
General & Tech Moderator
MY350Z.COM
Premier Member
 
Joined: Jan 2013
Posts: 10,400
Likes: 2,226
From: ZdayZ
Default

Fuel tank door release solenoid?
Reply
Old Oct 5, 2015 | 01:23 PM
  #9  
cyc5181's Avatar
cyc5181
New Member
iTrader: (12)
 
Joined: Feb 2007
Posts: 433
Likes: 8
From: Houston
Default

bump bump

since the itrader is gone....... just to let you guys know Kyle is a top notch seller. very easy to deal with, provides tracking info as soon as payment received. The item I got is exactly what his pics shown.

Buy with confidence guys.
Reply
Old Oct 19, 2015 | 07:48 PM
  #10  
kyamcg's Avatar
kyamcg
Thread Starter
Registered User
iTrader: (2)
 
Joined: Jun 2013
Posts: 25
Likes: 0
From: Columbus
Default

Thanks cyc!

Sorry it slipped my mind to check on this thread.

jhc, I do have a release solenoid still if you need it, I'll PM you.
Reply
Old Oct 20, 2015 | 05:47 AM
  #11  
Shane86's Avatar
Shane86
New Member
iTrader: (1)
 
Joined: Aug 2013
Posts: 201
Likes: 2
From: Minneapolis, MN
Default

is the 2007 base San Marino Blue by any chance?
Have any body panels left? Bumpers?
Reply
Old Oct 25, 2015 | 09:50 AM
  #12  
kyamcg's Avatar
kyamcg
Thread Starter
Registered User
iTrader: (2)
 
Joined: Jun 2013
Posts: 25
Likes: 0
From: Columbus
Default

Originally Posted by Shane86
is the 2007 base San Marino Blue by any chance?
Have any body panels left? Bumpers?
Yes, it was San Marino Blue.

Most of the body panels were either damaged or reused.

The only SMB body panel I've got left is the hatch. It's got a dent along the back edge that could be pulled straight, and the glass is intact.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
XM 1
Engine & Drivetrain
29
Jul 10, 2022 07:44 AM
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
MM'08_350Z
VQ35HR
225
Apr 22, 2021 09:42 PM
350z82
Exterior & Interior
19
Oct 1, 2015 06:25 PM




All times are GMT -8. The time now is 03:08 AM.