Street Image will be doing another Install Day for all you Z's and G's.

On February 26, 2005, we will be doing an install day for the people with the rear camber issues they are having from lowering their car this mod will fix the issues.

We will be doing them for $280 installed Cash Only.

Please Sign yourself up.

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Contact me jimmy@streetimage.com to confirm your spot.

 

Do I need this if I have the hotchkis springs?

 

Hey Kamz,

Yea you will need it, Unless your alignment shop fixed it some how.

 

I was at west end alignment and darin took a look at the SPC cams. He told me that I'll only get .2 of improvement. I already have the camber and traction arms and the best I can do on rear camber is 2.6

 

Hey bkchang79:
I'd like you to know that I had my SPC rear camber+toe kit installed at StreetImage and also took it to WheelWarehouse to get an alignment. The rears are freakin PERFECT. They are at -.8 both sides. Before the alignment? -2.5 and -2.0

I drive a G35 sitting on 19" HREs wrapped in 275/35/19 toyos for the rears and set on HKS LS+ Coilovers.

Hmm... I wonder what the issues is. Last i remember, you drive a G too right?

 

hahah sup drew, how did those cusco arms work out?

 

JKDman,

How much was the alignment? I called West End Alignment and he said an alignment is $80 bucks, but if you have camber kit its going to cost $300


Tony

 

JDK, check your alignment sheet if it's set at zero. My toe is at 0, the only way I can get those camber specs is if my toe is screwed up. I have a g35 coupe as well.

 

BUMP for Street Image. These guys are the best.

 

How much just for the toe bolt?

 

PM Sent 350ed.

 

If you guys want or need to install the Toe Bolt the total would be $300 Cash. Come on guys this is a good deal jump on it now

 

i installed the spc toe bolts, and my car is lowered 1.5" in the rear. i was able to set my toe to 0, and get -1.2 degrees of camber. he actually dialed it to -1.0, but i had him put a little bit of camber back into it.

 

Bump for Street.
Cool bunch of guys, clean shop, no b.s.

I would head up and do an install, but still recovering from the recent wheels and suspension mods.
Plus: Why do you guys have to be so far?


BTW:
Protocav, do you have the camber rods and everything else?

nm: I noticed your sig.

 

Hi Jim, I didn't get your PM. Can you resend.
I'm now going to be out of town that day but maybe for a different day.

 

Hmm...Hey Jimmy, would the camber fit my g35 sedan?