18x 10 in the rear *getting new track wheels possibly* ideal offset
#24
Registered User
iTrader: (19)
Join Date: Jun 2002
Location: newport beach. so cal
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Motormouth
true, what about handling characteristics?
even changing the width of the tires on a stock rim/track has effects on all sorts of things.
also, do you have a current pic of your rims? I can't remember what it looked like at the final suspension settings.
even changing the width of the tires on a stock rim/track has effects on all sorts of things.
also, do you have a current pic of your rims? I can't remember what it looked like at the final suspension settings.
handling can be thrown in so many directions if you dont research enough. fundamentally, from my go kart/track experience, usually wider front track can lead to oversteer and wider rear track leads to understeer. its all about balance and what the driver wants out of his/her car.
my personal vote would be 18x9+5 18x10 0
btw motormouth, clean and simple car-love it
#25
Banned
iTrader: (44)
thanks, soon it will be better.. coilovers, my bodykit installed... mmmm... everything clean though
and don't get me wrong, I love the low offset look like you have, but for the track... I mean, you are talking about alot of suspension compression and side loads on the tire wall...
and yeah, karting taught me the same!! wide front track and you are SPINNING hahahah... so funny.
and don't get me wrong, I love the low offset look like you have, but for the track... I mean, you are talking about alot of suspension compression and side loads on the tire wall...
and yeah, karting taught me the same!! wide front track and you are SPINNING hahahah... so funny.
#27
Registered User
iTrader: (20)
Join Date: May 2006
Location: Houston, TX & WPB, FL
Posts: 1,946
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by plumpzz
Ur right, probably need +30 for 295. I think I can just barely fit a 285/35/18
you have +18 right? if so there is plenty of room for 285/35, 295 and you may have to roll your fender.
#29
Registered User
iTrader: (20)
Join Date: May 2006
Location: Houston, TX & WPB, FL
Posts: 1,946
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by plumpzz
Im lowered 1.5 inches. I would rub if i didnt have my fender cut (rolling rubbed!) with 275/40/18. With 285/35/18 i should be good, but 295 would be pushing it
#30
Sponsor
Shine Auto Project
Shine Auto Project
Thread Starter
iTrader: (89)
Join Date: Nov 2004
Location: osaka ~ los angeles[213]
Posts: 11,517
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the feedback ill probably go +15 my car is pretty much a daily / track car though i havent seen a good track day in months due to the emptiness of the wallet but hopefully soon
appreciate it folks !!!
appreciate it folks !!!
#31
Registered User
iTrader: (49)
Originally Posted by Boneout JZA80
the front offset is fine for the track wheels ill be getting next it is 18 x 9 -22 but the rears are 18 x 10 my choices are -25 or -15 i would want the lowest possible but im not the greatest guy with offsets... your advice would be appreciated
thanks
thanks
#32
Registered User
iTrader: (61)
Get the +15.
The lower you are the better the aggressive offset is, just rememeber to roll your fenders though.
With my time attacks, the rear coilovers are adjusted to the lowest setting and this is a 19x10.5 +22 offset and the rims rubbed against the coilover on the inside because of the sick camber from the drop. I need a spacer now to avoid rubbing on the inside. The fender is rolled and has plenty of room.
Aggressive offsets FTW!
I can't wait to put those 5 zigens on my ride Ben.
The lower you are the better the aggressive offset is, just rememeber to roll your fenders though.
With my time attacks, the rear coilovers are adjusted to the lowest setting and this is a 19x10.5 +22 offset and the rims rubbed against the coilover on the inside because of the sick camber from the drop. I need a spacer now to avoid rubbing on the inside. The fender is rolled and has plenty of room.
Aggressive offsets FTW!
I can't wait to put those 5 zigens on my ride Ben.
#34
Registered User
iTrader: (61)
Originally Posted by Motormouth
why did you not get camber adjusters and remove some of the camber so you didn't contact the coilover?
Z's love negative camber. Besides it's not too bad at this point. It only rubs when entering parking lots in weird angles. I'd rather just get a 5mm spacer and not deal with it. I've lifted the suspension for now temporarily.
Thread
Thread Starter
Forum
Replies
Last Post