[DFW]: DFW's Lounge
#9723
New Member
Thanks for the compliments, crew.
Last edited by firekrave; 10-20-2009 at 08:59 AM.
#9726
New Member
#9728
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
If any of you peeps need your lower control arm bushings replaced let me know!
I have the Frankenstein socket!!! lol
https://my350z.com/forum/brakes-and-...translink.html
-J
I have the Frankenstein socket!!! lol
https://my350z.com/forum/brakes-and-...translink.html
-J
#9732
New Member
4.8-liter 72-degree V10 putting out 560 hp at 8,700 RPM (that's 116.5 hp/liter) and 354 lb.-ft. of torque at 6,800 RPM
Redline: 9,000 RPM
Titanium valves, connecting rods, forged aluminum pistons, dry sump lubrication and a titanium exhaust manifold
Six-speed sequential gearbox
Torsen limited slip differential
3,263 pounds with a 48/52 front-to-rear weight distribution
Power-to-weight ratio of 5.8 pounds/hp
65 percent of the body is carbon fiber
20-inch BBS wheels wrapped in 265/35 ZR20 Bridgestone tires in front and 305/30 ZR20 in the rear.
0-62 MPH (100 km/h) in 3.7 seconds
Top speed of 201.94 MPH
Production limited to 500 units
Redline: 9,000 RPM
Titanium valves, connecting rods, forged aluminum pistons, dry sump lubrication and a titanium exhaust manifold
Six-speed sequential gearbox
Torsen limited slip differential
3,263 pounds with a 48/52 front-to-rear weight distribution
Power-to-weight ratio of 5.8 pounds/hp
65 percent of the body is carbon fiber
20-inch BBS wheels wrapped in 265/35 ZR20 Bridgestone tires in front and 305/30 ZR20 in the rear.
0-62 MPH (100 km/h) in 3.7 seconds
Top speed of 201.94 MPH
Production limited to 500 units
#9739
Registered User
Join Date: Jan 2007
Location: Dallas
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
If any of you peeps need your lower control arm bushings replaced let me know!
I have the Frankenstein socket!!! lol
https://my350z.com/forum/brakes-and-...translink.html
-J
I have the Frankenstein socket!!! lol
https://my350z.com/forum/brakes-and-...translink.html
-J
#9740
Living in 350Z
iTrader: (64)
anyone seen this vid before..? checkout the beginning (side mirrors) and at about 1 min in the headlight washers come out..
http://www.youtube.com/watch?v=6sjQE...layer_embedded
http://www.youtube.com/watch?v=6sjQE...layer_embedded