[DFW]: DFW's Lounge
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
Nexx,
swing by autozone and buy one of these pumps to change your diff oil...
do it like this - pump goes directly into the bottle:
It doesnt need to screw into the fluid bottle. I actually went to a dollar store and found one that fits it...so i pour my fluid into it and screw the pump onto it......its clear plastic also, so i know about how much i have left as well as im pumping..
you will also need a 10mm allen socket to remove the diff fill and drain port.
you must do this with the car on the ground......or jacked up and level.......
I have a level on my car to check before and after i jack up to make all these fluid changes easy.
-J
swing by autozone and buy one of these pumps to change your diff oil...
do it like this - pump goes directly into the bottle:
It doesnt need to screw into the fluid bottle. I actually went to a dollar store and found one that fits it...so i pour my fluid into it and screw the pump onto it......its clear plastic also, so i know about how much i have left as well as im pumping..
you will also need a 10mm allen socket to remove the diff fill and drain port.
you must do this with the car on the ground......or jacked up and level.......
I have a level on my car to check before and after i jack up to make all these fluid changes easy.
-J
Last edited by JasonZ-YA; 09-15-2010 at 11:08 AM.
Retired Admin
iTrader: (95)
Chris - the axle click is a known issue and is part of the Technical Service Bulletin. You can get this done at the dealership for free (I think that's if you're under warranty, but it wouldn't hurt to ask).
Sleeps in 350Z
iTrader: (24)
Join Date: Mar 2007
Location: Flower Mound , TX
Posts: 5,745
Likes: 0
Received 0 Likes
on
0 Posts
Oh really ?
I will check in to this....I still have the extended warranty.
Thanks
How's it going up there ?
Retired Admin
iTrader: (95)
Things are all right here. Grad school has me reading sht all the damn time (and I hate reading), though. Hopefully, when I can add "Dr." before my name, it'll all be worth it.
Sleeps in 350Z
iTrader: (24)
Join Date: Mar 2007
Location: Flower Mound , TX
Posts: 5,745
Likes: 0
Received 0 Likes
on
0 Posts
Believe me, you will have plenty of time in the later part of life to enjoy your hard work.
Good luck !
Professional
iTrader: (5)
Any of you guys ever had the door handle problem yet? I just got done replacing mine. It's so nice to be able to open my door from the outside again. Now I need to figure out why my window is acting screwy. Jake maybe you have some insight on the window. Also I'm replacing my pass side headlight tomorrow cuz it got all foggy and the headlight restore stuff that I bought sucks. Hopefully it won't be too difficult to swap out the bulbs in that cuz I know it didn't cone with the headlight since I only paid $107 for it.
Professional
iTrader: (5)
No I replaced the door handle cuz part of it broke but when I had a shop look at it a while back they messed up my window and knocked it offtrack. I put it back on track but now sometimes when I use the auto up it will roll up and then roll back down a little and it almost never rolls down that little bit when I open the door so if I'm not careful, the window hits the top of my car when I close the door.
Living in 350Z
iTrader: (64)
No I replaced the door handle cuz part of it broke but when I had a shop look at it a while back they messed up my window and knocked it offtrack. I put it back on track but now sometimes when I use the auto up it will roll up and then roll back down a little and it almost never rolls down that little bit when I open the door so if I'm not careful, the window hits the top of my car when I close the door.
Sleeps in 350Z
iTrader: (5)
Ok guys, I'm not trying to start the anti-hella-flush thing again... but look at this one. This is the "rice-ification" of the Z.
https://my350z.com/forum/8658518-post11485.html
https://my350z.com/forum/8658518-post11485.html
Last edited by AllstarE4; 09-15-2010 at 03:02 PM.
Professional
iTrader: (5)
Ya Jake I'm lazy too. It's just irritating that the window is supposed to roll down like 1/4 inch when you open the door and mine doesn't do that sometimes. I just gotta be careful to make sure I don't break it until I stop being lazy. I shouldve done it today. I had the outer door panel off just needed to take the inner one off.
New Member
iTrader: (41)
Living in 350Z
iTrader: (64)
Ya Jake I'm lazy too. It's just irritating that the window is supposed to roll down like 1/4 inch when you open the door and mine doesn't do that sometimes. I just gotta be careful to make sure I don't break it until I stop being lazy. I shouldve done it today. I had the outer door panel off just needed to take the inner one off.
https://my350z.com/forum/5779726-post17.html
Professional
iTrader: (5)
Jake, I owe you a beer sir. I had no idea there was a reset switch. I'll get this done tomorrow when I do my headlight. Hell, I guess I owe vo a beer too for making that thread.