booger

iTrader: (6)

Was looking for the thread that [ i believe ] Sound Performance had came out with it . Wanted to see if there was any one running it and how they liked it . Any news on it ?

KTaylor

iTrader: (17)

+1 i was thinkin bout that the other day

Bullitproof

iTrader: (3)

who knows. since it's not backed by aem, and isn't 350z specific(it's a universal unit adapted to work with our cars), i wouldn't touch it.

phunk

iTrader: (21)

Sound Performance knows the AEM EMS better than or as well as anyone who possibly could. They worked with an engineer at AEM to figure out the wiring.

Wiring an EMS is not a crazy task. There is nothing to worry about. AEM will support their Universal EMS, and their Universal EMS is the same no matter what car it is running.

I have a FCON in my car, the same FCON that will be found in any car running a FCON... the only difference is how its wired. Same thing with all piggy backs, such as the unichip that came with your turbo kit.

Nothing to worry about here!

booger

iTrader: (6)

Phunk , Do you remember if it was a plug and play , or needed to be wired ?

Does any one know if the thread about it got deleted ? I cant find it any where .

failsafe306

iTrader: (38)

It comes with the harness and all sensors, even an AEM wideband....that's why it's so expensive; cause it's all inclusive.

booger

iTrader: (6)

I Googled Sound performance and cant come up with any thing . Does any one have thier web address ?

Bullitproof

iTrader: (3)

Yeah Phunk, but your wiring was done by HKS, not by some other shop. If this was AEM backed, they would have said so. It would have been a huge selling point.

nissansource

iTrader: (10)

actually phunk when you call aem and ask them about Sound perfomrances setup they will not warrenty it since they are modifying something inside the Universal unit. Plus this setup its not a true to control the cam phasing. this may be a reason SP isnt going full force with this setup, and this is probly another reason my AEM hasnt released it themselfs

Gman2004

iTrader: (8)

I recently read a post in the FI section where the op said they dumped the UTEC for AEM, but was still having problems with limp mode or something like that. It was pretty recent.

Gman2004

iTrader: (8)

found the thread.

https://my350z.com/forum/forced-induction/201067-no-throttle.html

booger

iTrader: (6)

I would say ....the problem wasnt with his EMU

SO DOES ANY ONE KNOW HOW GET A HOLD OF SOUND PERFORMANCE ??

PLEASE !!!!!!

phunk

iTrader: (21)

and the wiring done is very simple. I have done much more complex wiring countless times. its very simple to hook up wires... everyone here running an emanage ultimate has just as many wires spliced in as my FCON does.

phunk

iTrader: (21)

www.sound-performance.com

booger

iTrader: (6)

Thanks Phunk..tried that but with out the slash between words and got a audio company .