are there any engine management systems out there that have direct outputs for a/f, nit pressure, fuel pressure? either outputs for gauges or an output with a screen that displays all of the above? this would make wiring much easier. thanks for the help

 

bump...

 

The plug & play Haltech Platinum 350Z ems has a plug and play dash option that I have attached below. All of your standard information such as rpm, coolant temp, air temp, a/f ratio, etc is transmitted to it and can be setup with shift lights, alarm lights, math channels, etc. In addition to that, there is an endless list of plug & play sensors for the dash such as oil pressure, fuel pressure, etc. This Racepak dash (with built in Haltech module) fits nicely in 350Z cubby in the dash.

 

do you have physical dimensions on that thing? i didnt see any on the link
thanks

 

7.25" x 4"

Here is the setup in our drag car:

 

Hey Hal, that thing says it has configurable inputs on it. Are those inputs configurable with ECU manager, in axes, etc? In other words, why am I waiting on the input/output box if this has it all?

 

rcdash, inputs into the dash do not echo back into the Haltech. They are for viewing/logging on the dash.

 

Gotcha - thanks!