VQ35HR Turbo Build
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Submarines
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
VQ35HR Turbo Build
I know this is probably a ways off and yes I did search (including google) and really didnt find much as far as builds go. That is probably due to the fact that nobody has yet to do one nor are any parts out for it. My question tho is that of a starter build for what will come.
What will be needed for a Twin Turbo VQ35HR Capable of 600+ whp? I have heard rumors our internals should be good to 750+ anyone know of this being true. How about our tranny. Just upgrade clutch + flywheel and let her rip? Does anyone have any information on any sort of upgrades we are going to need to do for our car to push 600+ whp? Anything we can go ahead and do while we patiently wait for a reasonably priced turbo setup to come out?
On a side not will someone explain to me why a single exhaust is better for turbo cars than a dual? I am not 100% sure on this topic and was going to make this my first upgrade to my 08 Z.
Thanks
-Ryan (/equip flamesuit )
What will be needed for a Twin Turbo VQ35HR Capable of 600+ whp? I have heard rumors our internals should be good to 750+ anyone know of this being true. How about our tranny. Just upgrade clutch + flywheel and let her rip? Does anyone have any information on any sort of upgrades we are going to need to do for our car to push 600+ whp? Anything we can go ahead and do while we patiently wait for a reasonably priced turbo setup to come out?
On a side not will someone explain to me why a single exhaust is better for turbo cars than a dual? I am not 100% sure on this topic and was going to make this my first upgrade to my 08 Z.
Thanks
-Ryan (/equip flamesuit )
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Submarines
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SOLO-350Z
You obviously are lieing and didn't search at all. Because there is a topic on the FIRST PAGE in this area that shows a build.
#5
Registered User
Join Date: Aug 2007
Location: thornhill
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
i dont think our cars will be able to put down 600+ hp on stock internals, cause our compression is too high. Im not 100% about it but that would be my guess, even though i keep hearing and reading that our internals are capable of lot of power i dought that much...
#6
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Submarines
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
From What i have been reading all that is really needed is a TT setup. Our stock block will hold massive power no need to replace anything but clutch + flywheel and exhaust if you please. But to aid in longevity you can do fuel system upgrades and methenol injection.
Anyone have anything else to add?
Anyone have anything else to add?
#7
Registered User
iTrader: (10)
Join Date: Nov 2006
Location: new orleans
Posts: 2,046
Likes: 0
Received 0 Likes
on
0 Posts
https://my350z.com/forum/showpost.ph...71&postcount=8
https://my350z.com/forum/shop-builds/357675-twin-turbo-vq35hr-performance-factory-exclusive-465whp-8-3psi-base-tune.html
you really didnt look hard for it at all. there is a thread titled "PLEASE Read This Before Asking a Question in Here" stuck to the top of this sub forum.
https://my350z.com/forum/shop-builds/357675-twin-turbo-vq35hr-performance-factory-exclusive-465whp-8-3psi-base-tune.html
you really didnt look hard for it at all. there is a thread titled "PLEASE Read This Before Asking a Question in Here" stuck to the top of this sub forum.
Trending Topics
#8
Registered User
iTrader: (17)
Originally Posted by newt0n
From What i have been reading all that is really needed is a TT setup. Our stock block will hold massive power no need to replace anything but clutch + flywheel and exhaust if you please. But to aid in longevity you can do fuel system upgrades and methenol injection.
Anyone have anything else to add?
Anyone have anything else to add?
nice ! do it ! 600 whp stock....
600 whp = 25+ K imo
#9
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Submarines
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tac-M
nice ! do it ! 600 whp stock....
600 whp = 25+ K imo
600 whp = 25+ K imo
/a**hole off
Seriously tho, I am more than willing to read anything someone puts out there as productive info. I, as many people, am in this for learning not bragging rights or to measure our pocket books. I never even state that I will even do this just want to know more about it. So I ask can we please keep the comments on track and try not to flame too much?
/equip secondary flamesuit
Last edited by newt0n; 05-19-2008 at 06:45 PM.
#12
New Member
iTrader: (19)
Originally Posted by mikez97
he did it safely at 495whp on 10.5lbs of boost
and i love the tune he gave me
and alot of custom piping you have too look into
i am one of the first out there
and i love the tune he gave me
and alot of custom piping you have too look into
i am one of the first out there
#13
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Submarines
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 350Zimo
hey a question for you. How does your clutch handle the whp/wtq? I have the same JWT clutch + flywheels and i was wondering how it does at such a power level. Thnks
#16
Registered User
Join Date: Nov 2008
Location: New York
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
heyy
hey everyone, i am new to this site. i have an 07 convertible....was wondering if anybody knows if there is or isnt a twin turbo kit out for the new vq35hr engine yet???? please help! thanks so much! this is a great site!!! 11/22/08
#17
Registered User
Join Date: Feb 2008
Location: Florida
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Oh brother... Dude, do yourself a favor and don't bring this upon yourself.