350z HR Bolt-Ons Dyno Updated 8/6/14
11-20-2014, 11:22 AM
#183
Yeah tampas in the area of 3+ hours away for depending where I go, probably be right around 4 hours to Bradenton. But that's the price I pay for living in ocala where there are no tracks besides oval dirt tracks lol.
Redline, ill hit you up when I plan on heading out there. I will be going out there regardless in the next month or 2 for sure.
What mods do you have done redline? (on mobile so can't see sigs if you have one)
It'd be pretty chill for all 3 of us to be able to get together at a track though, so just think about it assassin, hopefully you'll decide to come out to tampa and have some fun
Also - just added a true dual exhaust, need to put in the tp's now, but I just hit full bolt-ons minus headers and tp's which I have just couldnt get them in at the time.
Redline, ill hit you up when I plan on heading out there. I will be going out there regardless in the next month or 2 for sure.
What mods do you have done redline? (on mobile so can't see sigs if you have one)
It'd be pretty chill for all 3 of us to be able to get together at a track though, so just think about it assassin, hopefully you'll decide to come out to tampa and have some fun
Also - just added a true dual exhaust, need to put in the tp's now, but I just hit full bolt-ons minus headers and tp's which I have just couldnt get them in at the time.
12-02-2014, 09:12 PM
#186
Registered User
Thread Starter
12-02-2014, 09:14 PM
#187
Registered User
Thread Starter
Yeah tampas in the area of 3+ hours away for depending where I go, probably be right around 4 hours to Bradenton. But that's the price I pay for living in ocala where there are no tracks besides oval dirt tracks lol.
Redline, ill hit you up when I plan on heading out there. I will be going out there regardless in the next month or 2 for sure.
What mods do you have done redline? (on mobile so can't see sigs if you have one)
It'd be pretty chill for all 3 of us to be able to get together at a track though, so just think about it assassin, hopefully you'll decide to come out to tampa and have some fun
Also - just added a true dual exhaust, need to put in the tp's now, but I just hit full bolt-ons minus headers and tp's which I have just couldnt get them in at the time.
Redline, ill hit you up when I plan on heading out there. I will be going out there regardless in the next month or 2 for sure.
What mods do you have done redline? (on mobile so can't see sigs if you have one)
It'd be pretty chill for all 3 of us to be able to get together at a track though, so just think about it assassin, hopefully you'll decide to come out to tampa and have some fun
Also - just added a true dual exhaust, need to put in the tp's now, but I just hit full bolt-ons minus headers and tp's which I have just couldnt get them in at the time.
Yea man I will think about it. I would love to meet up but tampa is extremely far away lol.
12-04-2014, 03:09 AM
#190
Registered User
Thread Starter
Lol never seen that happen before bro....and we always go far away to do our stuff...plus usually after 1 a.m no cops lol we can all just chill dont have to run lol
12-24-2014, 10:49 PM
#192
Registered User
Join Date: Oct 2012
Location: houston
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Okay so what are your numbers with the upper plenum from z1
I have
Stillen gen 3
Stillen headers
GTM testpipes
Motordyne shockwave
Nst pulleys
Jwt clutch and flywheel
UpRev tune
Puting 306 whp on dynojet
I'm interested in getting the plenums now that I just found out about it!
I have
Stillen gen 3
Stillen headers
GTM testpipes
Motordyne shockwave
Nst pulleys
Jwt clutch and flywheel
UpRev tune
Puting 306 whp on dynojet
I'm interested in getting the plenums now that I just found out about it!
12-24-2014, 11:24 PM
#193
The z1 plenum is essentially a stock plenum, just painted, or chrome..
IIRC they started doing an in-house port job recently though. I have a z1 plenum, but it was purchased from a member here and it was p&p along with a stock lower plenum.
The plenum definitely gave it some more power (not dyno proven) but I am sure it increase as well as some throttle response.
Btw those are nice numbers bud!
IIRC they started doing an in-house port job recently though. I have a z1 plenum, but it was purchased from a member here and it was p&p along with a stock lower plenum.
The plenum definitely gave it some more power (not dyno proven) but I am sure it increase as well as some throttle response.
Btw those are nice numbers bud!
12-25-2014, 05:51 AM
#194
Registered User
Thread Starter
Okay so what are your numbers with the upper plenum from z1
I have
Stillen gen 3
Stillen headers
GTM testpipes
Motordyne shockwave
Nst pulleys
Jwt clutch and flywheel
UpRev tune
Puting 306 whp on dynojet
I'm interested in getting the plenums now that I just found out about it!
I have
Stillen gen 3
Stillen headers
GTM testpipes
Motordyne shockwave
Nst pulleys
Jwt clutch and flywheel
UpRev tune
Puting 306 whp on dynojet
I'm interested in getting the plenums now that I just found out about it!
Hey man great numbers. If the chance comes about maybe swap out those stillen headers for some PPEs. I still need to go back to the dynojet that I did my baseline on. On another dynojet I made 305 whp. It reads close to mustang dyno numbers. I will go back to my original dyno in january hoping for 315 whp. I def think the z1 upper plenum is worth the 295$ I will purchase their z1 lower ported plenum as soon as my wallet recovers after christmas. Here is my list:
Injen cai
z1 upper plenum
top speed pro 1 test pipes
stillen y pipe
agency power exhaust
uprev tune n 4.08 gears
BTW in 4th gear I made 295 on a mustang dyno. In 5th would be around 300whp on a mustang dyno
01-17-2015, 05:45 AM
#195
Registered User
Thread Starter
Got my custom 3inch sri intakes in the mail. Very impressed with the quality and how these came out. Plus I got them at a really good price. Will be putting these on monday, bigger injectors plus retune.
01-17-2015, 05:57 AM
#196
Registered User
Join Date: Jul 2014
Location: brooklyn
Posts: 1,144
Likes: 0
Received 0 Likes
on
0 Posts
Interest in modding cars & posting is great for the forum
but it's been over a month since I posted last.
SO, did you EVER break 14.00 seconds in the 1/4 mile ????
SO, did you EVER break 14.00 seconds in the 1/4 mile ????
01-17-2015, 03:47 PM
#198
Registered User
Thread Starter
Hey man pls don't reply to him and get him started. He just comes online to run his mouth. I have never been to the track so he's predicting a 14 sec run. I am tired of having to ask mods to delete his posts out of my threads. Never knew one human being could be so extremely annoying. Not only to me, but take notice of his posts all over the forum. Stock hr can hit way lower than a 13.9
Last edited by The_Assassin; 01-17-2015 at 03:48 PM.
01-17-2015, 04:28 PM
#199
Hey man pls don't reply to him and get him started. He just comes online to run his mouth. I have never been to the track so he's predicting a 14 sec run. I am tired of having to ask mods to delete his posts out of my threads. Never knew one human being could be so extremely annoying. Not only to me, but take notice of his posts all over the forum. Stock hr can hit way lower than a 13.9