20'' Wheel & Tire Discussion Thread
Actually 20's are perfect because they give you the with you need but style selection does decrease. 20's are great with grip.
JWT pop charger
Injen SES
Volk GTS's Gunmetal
(front) 255/30/20 toyo
(rear) 285/30/20 toyo
Tanabe GF210's
Hawk HPS
JP Type-N front bumper
Kenwood DDX7017
Kenwood KNA-G510 GPS Navigation System
Garmin GXM30 Smart Antenna
G2 Caliper Paint ( Red )
JVD 350Z Caliper Graphics ( Silver )
2006 Armada Blk
Kenwood DDX6019
Kenwood KNA-G510 GPS Navigation System
Garmin GXM30 Smart Antenna
JWT pop charger
Injen SES
Volk GTS's Gunmetal
(front) 255/30/20 toyo
(rear) 285/30/20 toyo
Tanabe GF210's
Hawk HPS
JP Type-N front bumper
Kenwood DDX7017
Kenwood KNA-G510 GPS Navigation System
Garmin GXM30 Smart Antenna
G2 Caliper Paint ( Red )
JVD 350Z Caliper Graphics ( Silver )
2006 Armada Blk
Kenwood DDX6019
Kenwood KNA-G510 GPS Navigation System
Garmin GXM30 Smart Antenna
was all that neccessary??
Currently im running 275 35 20 in the rears and 245 35 20 in the front my front tires are done and need to be replaced. I found a good deal on new tires but the size on the new ones are 255 45 20 and i wanted to know if i would have any problems with that size. If anyone knows please let me know please and thanks.
Currently im running 275 35 20 in the rears and 245 35 20 in the front my front tires are done and need to be replaced. I found a good deal on new tires but the size on the new ones are 255 45 20 and i wanted to know if i would have any problems with that size. If anyone knows please let me know please and thanks.
https://my350z.com/forum/wheels-and-...el-thread.html
255 45 20 will not work with that rear setup, #1 it will look like a 4x4 tire and #2 it will be too tall compared to your rear
Check this thread:
https://my350z.com/forum/wheels-and-...el-thread.html
255 45 20 will not work with that rear setup, #1 it will look like a 4x4 tire and #2 it will be too tall compared to your rear
https://my350z.com/forum/wheels-and-...el-thread.html
255 45 20 will not work with that rear setup, #1 it will look like a 4x4 tire and #2 it will be too tall compared to your rear
Alot of negative comments in here...
Personally I think 20's on the z are pretty nice. If you're putting 20's on a z then weight is obviously not an issue...I personally don't give a ****! Haha
I just bought 20" work vs-xx in gold. Having problems fitting the fronts over the brembos.
Not sure of the center section style but the rears are 20x10.5 and just BARELY clear the brembos. The fronts are 20x9.5 et25 and seems like I'm going to need atleast a 20mm up front.
You guys should give me opinions on what setup to use...
Bolt on studed spacers? Or extended studs and regular style spacers?
I was thinking the extended studs and spacers would be better as I can fine tune the spacing by 2.5mm?
I dono will order on Monday.
Personally I think 20's on the z are pretty nice. If you're putting 20's on a z then weight is obviously not an issue...I personally don't give a ****! Haha
I just bought 20" work vs-xx in gold. Having problems fitting the fronts over the brembos.
Not sure of the center section style but the rears are 20x10.5 and just BARELY clear the brembos. The fronts are 20x9.5 et25 and seems like I'm going to need atleast a 20mm up front.
You guys should give me opinions on what setup to use...
Bolt on studed spacers? Or extended studs and regular style spacers?
I was thinking the extended studs and spacers would be better as I can fine tune the spacing by 2.5mm?
I dono will order on Monday.
A common setup is:
255-30-20 or 245-30-20
285-30-20
lol at responses
For those whos running 20x12 in the rear, what size tire are you running? Please post your setup. Pics are a plus 
thanks in advance

thanks in advance
Last edited by from330ci2m3; Aug 22, 2012 at 11:32 PM.
Joined: Jan 2009
Posts: 7,287
Likes: 189
From: Eastern NC












