19" Wheel & Tire Discussion Thread
#782
Again, look at what people are already running and review the links I posted, there is no reason it should be this difficult with this much info available
#783
If you want cheap 19's , look into a set of OEM G35 19's, you can probably even get a set with the proper tires for your car.
#784
Need help with wheel fitment!!
Hey everyone, I'm hoping one of the wheel gurus on here will be able to help me out with the problem I'm facing. My Z currently has a set of 19x10.5 +22 AME Tracers all around. Problem is that the front wheels stick out roughly 2-3 inches past the fenders. I bought the car with after market brembo rotors, could they be pushing the wheels out farther than stock? I'm currently running a 255/35 on the front wheels and want to be able to run a 275/35 at least. Any help would be greatly appreciated.
#785
Hey everyone, I'm hoping one of the wheel gurus on here will be able to help me out with the problem I'm facing. My Z currently has a set of 19x10.5 +22 AME Tracers all around. Problem is that the front wheels stick out roughly 2-3 inches past the fenders. I bought the car with after market brembo rotors, could they be pushing the wheels out farther than stock? I'm currently running a 255/35 on the front wheels and want to be able to run a 275/35 at least. Any help would be greatly appreciated.
#787
The wheels in the front(size&offsets) are incorrect.The brakes have nothing to do with it.
I'd like to see pics.Fronts sticking out that far is ultra ricer.I'd replace the fronts
with wheels of a proper fitment.
I'd like to see pics.Fronts sticking out that far is ultra ricer.I'd replace the fronts
with wheels of a proper fitment.
#788
#791
Hey everyone, I'm hoping one of the wheel gurus on here will be able to help me out with the problem I'm facing. My Z currently has a set of 19x10.5 +22 AME Tracers all around. Problem is that the front wheels stick out roughly 2-3 inches past the fenders. I bought the car with after market brembo rotors, could they be pushing the wheels out farther than stock? I'm currently running a 255/35 on the front wheels and want to be able to run a 275/35 at least. Any help would be greatly appreciated.
We need pics or more info to help. Suspension, camber, tires, would be helpful in determining what you're working with
#793
Bad wheel width combo? Or acceptable?
So this company got these wheels im interested in but only have them in 19x8.5 and 19x11 ... is it dumb for me to purchase that wheel width combo? im lowered on tokico d-spec kit about 1.25" alll around...my dad rollled my rear fenders somewhat...i just usually see people gettin like 8.5x9.5 or 9.5x10.5 and so on...opinions plz ?
Last edited by d4rksh4deZ; 05-29-2012 at 04:59 PM.
#795
So this company got these wheels im interested in but only have them in 19x8.5 and 19x11 ... is it dumb for me to purchase that wheel width combo? im lowered on tokico d-spec kit about 1.25" alll around...my dad rollled my rear fenders somewhat...i just usually see people gettin like 8.5x9.5 or 9.5x10.5 and so on...opinions plz ?
Now get ready to put your flame suit on, because you're gonna get some *heat* for not searching here on offsets and tires.
If you still have a problem after searching for info, PM me.
#797
So this company got these wheels im interested in but only have them in 19x8.5 and 19x11 ... is it dumb for me to purchase that wheel width combo? im lowered on tokico d-spec kit about 1.25" alll around...my dad rollled my rear fenders somewhat...i just usually see people gettin like 8.5x9.5 or 9.5x10.5 and so on...opinions plz ?
#798
So this company got these wheels im interested in but only have them in 19x8.5 and 19x11 ... is it dumb for me to purchase that wheel width combo? im lowered on tokico d-spec kit about 1.25" alll around...my dad rollled my rear fenders somewhat...i just usually see people gettin like 8.5x9.5 or 9.5x10.5 and so on...opinions plz ?
Go with a 9.5 front with the 11, or 9.5 rear with the 8.5. That way you wont have to run ridiculous stagger to make the tires fit the wheel.
#799
Regardless, he could have answered his own question if he reviewed post #8 in the Top 100 FAQ or spent some time researching what others have done in this thread