<img src="http://api.photoshop.com/home_f393e58553d54743b341bd3639d84663/adobe-px-assets/e957a5aaf24f460f900cff2fbb05f333" width="800" height="600"/>

 

Sense all of you are big on enkei's I have a quick question about the RPF1's....

If i were to run 17x9.5 +18 all around with 275/40's how much could i drop my car before i have issues rubbing? While still maintaining a decent camber for the street...

 

I'd post mine up if i could ever figure out how to load the bigass pics i've got.

I think me and another member are the only ones here that have em on a black Z

 

25 pics of 18x10 Enkei RPF1s with 285/30 rubber on them:

http://gotbluemilk.com/web100225/219/index.html

Offsets are all +38, and I currently run a 15mm spacer in the rear and 10mm spacer in the front with extended studs and true spacers.

 

did those center caps come with the wheels? i hate the black and red ones.. cant find any regular silver ones like yours.

 

Running around -2 camber you can drop the front over 1 inch no problem, tire will be flush with the wheel well. The rear to flush it up you would need about 1.75 inch drop and spacers (10mm) to flush it to the lip.

 

did those center caps come with the wheels? i hate the black and red ones.. cant find any regular silver ones like yours.[/QUOTE]

The caps on my wheels are the one's that come only with the 19" version of Rpf'1's. Enkei says they only fit 19" wheels . i just looked it up

 

GTC01 19x9.5 w/ 275/35

 

looks good.. how come you didn't go 19x10 on the back?

 

I bought them used so I didn't really have a choice lol. I also like the square setup so now I can rotate! After I roll my fenders and lower I'm going to add so spacers to the rear to make them more flush.

 

Anyone else with pics of the ame wheels in hyper silver? Really beginning to like those.

 

Is anyone running work lug nuts on their rpf1's? I saw some people saying they wont fit but wasn't sure, I dont see why they wont....

 

Rays duralumin fit (short & extended).

 

Quick bs pictures:







enkei rp03 in SBC

Front: 18x9 +18mm - 245/40/18 - sumitomo htr z III
Rear : 18x10+22mm - 275/40/18 - sumitomo htr z III


No money for drop yet, eventually.

 

285/30 fronts and 295/30 rears on 18x10 RPF1s. The front offset is net +23 and the rear offset is net +28.

 

Here's a couple more of the GTC-01 wheel. These are 245/40/18 +18F and 275/40/18 +22R on a mild Hotchkis drop. Incidentally the straight-on (side) shot is the least flattering for these wheels. They have way more dimension to them when you see them in person.

 

Just got my Wheels/Springs on today.. Specs are 18x9.5+15 and 18x10.5+22 245/40/18 and 275/40/18 Springs are Tanabe GF210... Springs are still settling

 

^nice house...........................and wheels .

 

That license plate is badass!

 

*sigh*, already curbed one of my rims. I fail at life. Any suggestions?