Bout to get some new wheels, rear is 18x10.5" +15.

I will roll/cut the fenders, what's the biggest tire I can run? My camber is within stock spec and that's where I would like it to stay. Ideally I would like to run a 295 in the rear.

Front is a 18x9.5" +15, I don't think I'll have a problem running a 255, but might as well ask if that would be a problem too while im at it?

 

I am pretty sure there are a few running that size with a 265 falken azeni rt615.

here is a thread with someone running a 285, and Andy confirming that 275 fits as well. Stock camber will be an issue though

https://my350z.com/forum/showthread....ight=265+rt615

 

woof* is running the 18x9.5 +15 18x10.5 +15 RPF1s with 265/35/18 F and 285/35/18 R. They are T1-Rs, so they tend to run a little thin. In post 14, he said he had the rear fenders rolled a little bit and they no longer rub.



https://my350z.com/forum/showthread....ei#post3868519

 

I would say a 285/35 would be ok.

 

ings+1 TS-06 18x10.5 +15
Brigestone RE-01R 275/35/18
Project Mu Racing Caliper Kit 4 Piston

 

Just so happens the RPF1's are the wheels im getting. Thing is the 285/35 is the perfect size, just NO ONE makes a tire that size. The TR1's and a few other tires that aren't really up to my standards. I ran a Kumho MX before and I have to have something at least that sticky. Looking at the KDW2 in a 245/35 and 285/30 Thing is the BFG tires run quite thick from what I have seen so im going to check them out before I buy them. If I don't like them im going with a 255/35 and 295/30 (not sure what tire) out back and if need be roll and pull the fenders but I think I can make it work... We'll see i'll keep an update.