Will these Axis Pentas fit on an '05Z
Thread Starter
Registered User
iTrader: (2)
Joined: Jul 2008
Posts: 16
Likes: 0
From: Rancho Cucamonga
My apologies in advanced for the newbie question but I just got the 350Z 3 days ago
I found a pretty good deal on some wheels and wanted to know if they would fit:
Axis Reverb SET 18x8.5 - 5x114.3 15mm offset.
There's no refund so I wanted to be absolutely sure before I made the commitment. Also, is it difficult to transfer the TPSM to the new wheels?
Thanks!
I found a pretty good deal on some wheels and wanted to know if they would fit:
Axis Reverb SET 18x8.5 - 5x114.3 15mm offset.
There's no refund so I wanted to be absolutely sure before I made the commitment. Also, is it difficult to transfer the TPSM to the new wheels?
Thanks!
ALSO. watch out when buying axis wheels...https://my350z.com/forum/wheels-and-tires/189219-cracked-axis-hiro-s-pics.html
The outer edge of your wheel will be 21mm (0.8") farther outside the stock rims. That should be OK and actually look pretty good.
8.5 is not a very wide rim, so you are limited on the tire's width to a 245 or 255. 275 will be too wide.
The bolt pattern is correct.
It's usually no problem moving your sensors to different wheels, but I have no experience with the wheels you mention. Maybe someone else could help on this issue.
--Spike
8.5 is not a very wide rim, so you are limited on the tire's width to a 245 or 255. 275 will be too wide.
The bolt pattern is correct.
It's usually no problem moving your sensors to different wheels, but I have no experience with the wheels you mention. Maybe someone else could help on this issue.
--Spike
Thread
Thread Starter
Forum
Replies
Last Post







