i just got my stoptech 355mm setup, and installed it (cars on jackstand while i put the turbos in) and i have no rims at the moment, so i cant test it out, so here goes;

a friend of mine says that 18's (excluding the volk re30's) wont clear the 355 setup. does anybody have any experience with 355's and 18's?

 

They clear just fine, there is even someone running 17's over a 355 stoptech kit.

 

I have 355mm Stoptechs on my ADVAN RS 18" wheels. No problem. Not even close to interfering. That of course doesn't mean they will fit your wheels.

 

he tried 18" motegi touges, and those didnt fit. maybe there was error on his part?

 

Offset is too high...

 

It will clear the barrel of an 18" rim, but depending on the offset, might not clear the spokes. You could just get some spacers if your offsets were too high.

 

from personal experience,
355mm front/rear stoptechs will clear
18": te37 (9.5/10.5) +22, (9.5, 10.5) re30s +15/+18 ,(8.5/9.5) lmgt4s +25/+30, & stock Track Rays

 

Is there a good place for reference on what certain wheels will allow on bbk fitments?