Anyone running the toyo r888s on 10.5 rims? I would like to see some pics and any suggestions.

 

I am running the 305/35/18 on a 10" rim. No pics available.

 

Does your tire bulge out off the rim alot "like a fupa in spandex". Also is it the toyo r888s that you are using because I have read they are larger than the size given?

 

295's bulge out quite a bit on a 10.5, the sidewalls on a r888 are pretty stoudt. you're gonna get some supa fupa action with the 305

 

The tire is a race tire so it does not have a rim protection lip. The lack of this rim protection lip makes the tire look like it's oversized for the rim. It's overall width is also wide for it's size.

Don't buy these tires unless you have a good reason to buy them. If you drive on the track get em. They're good.

 

Does anyone got pics of this setup: Toyo R888 275/305 on 9.5/10.5? I'm close to picking up some new tires and wanted to see what this would look like. Also would I be rubbing with this setup?

 

I can get some pics...

How low is your car?

 

Current setup is:

265/35/18 on 9.5 +22 -1.5 Camber
285/35/18 on 10.5 +22 -1.2 Camber: Will be changing to -1.5 to -2.0.

The car is dropped with .5in spacing between tire and wheel well on all four corners. Right now I don't rub during hard cornering or bumps with stock non-rolled fenders.

 

IIQuickSilverII is running them on a 10.5" wheel. I think he has a couple pics he posted in another thread, but I don't recall which. Give him a PM.

 

https://my350z.com/forum/5486718-post34.html

 

You really think that is "supa fupa" bulge? Looks completely flush to me

 

Here's 295 on an 11" wheel

 

I see a slight bulge with the 305 on the 10.5, but nothing too crazy. I'd roll with these.

Anyone have a 35 profile pic on a 10.5?

 

This looks awesome. I like the fact that there's a slight stretch look on this setup.

 

Very nice Barzten!

 

wow..i run 305-25-20 on my 12's with some stretch. if you need traction, use a camber kit if u want it to hook up better.