Wanting to see pix of axis matrix on car
Just got a set of axis matrix. Was wondering if anyone already had them on their z and would love to see a few pix of them, as well as a few questions .Is the offset good to go or do we need spacers to make them look right. The size I got I think is the only size they make for the z 20 by 9 front with a 22 offset ,the rear is 20 by 10.5 with an offset of 35. Please would love to see some pictures as you can tell I am rather excited to get these.
this is not my car but here's an idea..think these might have spacers though..but i'm not sure..they might not

i have the axis shine 20x9 +15 offset front and 20x10 +20 offset rear and the rears i rub on on certain steep driveways if i'm not careful but not often. your front offsets will look fine..the rears will look fine but you might be able to fit a 10mm spacer back there..depending on how aggressive you want it to look.


i have the axis shine 20x9 +15 offset front and 20x10 +20 offset rear and the rears i rub on on certain steep driveways if i'm not careful but not often. your front offsets will look fine..the rears will look fine but you might be able to fit a 10mm spacer back there..depending on how aggressive you want it to look.

Just got a set of axis matrix. Was wondering if anyone already had them on their z and would love to see a few pix of them, as well as a few questions .Is the offset good to go or do we need spacers to make them look right. The size I got I think is the only size they make for the z 20 by 9 front with a 22 offset ,the rear is 20 by 10.5 with an offset of 35. Please would love to see some pictures as you can tell I am rather excited to get these.
Here is a link to mine with the matrix wheels. The offsets are not too bad, but I put a 15mm spacer on the rears and lowered the car and it is flush now. These pics were taken before the spacers were put on, but at these angles you cant tell its not flush.
https://my350z.com/forum/media-share...-roadster.html
Here is a link to mine with the matrix wheels. The offsets are not too bad, but I put a 15mm spacer on the rears and lowered the car and it is flush now. These pics were taken before the spacers were put on, but at these angles you cant tell its not flush.
https://my350z.com/forum/media-share...-roadster.html
https://my350z.com/forum/media-share...-roadster.html
Oh yeah I recomend going with a 285 rear tire!!!!!
Trending Topics
Going to the shop tomorrow to have my Matrix wheels mounted up. I will post up pics. The rears I am going to see how they look with the +35 offset with a 285, then measure for spacers if needed.
you look at this picture and it's stock? love these boards of unemployed car specialist. Car is TT with full carbon interior. Was talking about the wheels which get lot's of attention and look good. Post your car when you comment and it will lend to your credibility...
hahaha - You have ugly sunken battleship wheels on a 4x4 status stock Nismo and you are calling out another member's credibility? Post pictures of this TT engine bay and "full carbon interior". I'm calling BS!
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
Jun 19, 2022 06:30 PM
StreetStandard
Videos
2
Feb 4, 2016 09:44 AM




