Official Aggressive Wheels & Fat Tires Thread
#2605
New Member
iTrader: (10)
thought you were asking about stock 370z...edit forget the below
*************************************************
I had some 370z, they are 8.0F and 9.0R
you NEED at least a 20mm spacer on the front as to the wheels will rub the shock tower without them. Like you cant drive, rub. I learned that the hardways from a shop that put them on and didnt test drive the car!
also I recommend getting at least some 10-15 for the rear because it drove weird with the front spaced out farther than the rear.
I ran a 285 on that set up... I think that is about max for a 9.0
*************************************************
I had some 370z, they are 8.0F and 9.0R
you NEED at least a 20mm spacer on the front as to the wheels will rub the shock tower without them. Like you cant drive, rub. I learned that the hardways from a shop that put them on and didnt test drive the car!
also I recommend getting at least some 10-15 for the rear because it drove weird with the front spaced out farther than the rear.
I ran a 285 on that set up... I think that is about max for a 9.0
Last edited by 4SHIZZIL; 11-08-2011 at 11:11 AM.
#2606
New Member
iTrader: (10)
SICK, how did I miss this post!
Thanks a million man!
what are the offsets if you dont mind me asking, if not publicly please PM the offsets.
This is the set up I want to run. I was thinking 295F but I can live with 275...lol
if you ever want to sell. I have cash!
Ahhh crap 370z and G35/350z not same offset... but if you tell them I can adjust accordingly. I would need spacers on the front and rear which would require fender mods I believe. digging up my cheat sheet now.
Thanks a million man!
what are the offsets if you dont mind me asking, if not publicly please PM the offsets.
This is the set up I want to run. I was thinking 295F but I can live with 275...lol
if you ever want to sell. I have cash!
Ahhh crap 370z and G35/350z not same offset... but if you tell them I can adjust accordingly. I would need spacers on the front and rear which would require fender mods I believe. digging up my cheat sheet now.
Last edited by 4SHIZZIL; 11-08-2011 at 11:08 AM.