ReStylin

iTrader: (1)

These are just my bumming around rims, Rota P45R's I live in the Country and have a 800ft gravel driveway so unless im going somewhere for the weekend I rock these lol

But Im lowered on JIC FLTA2, Michilin Pilot Sport, 275/40R18



Im trying to find a set of nice rims for this summer since I bought a new house... I was thinking some Vossen CV3, something concave. Ill post some pics when Im done.

RUNWDVL

iTrader: (10)

You know what? Eff this!!! I'm just gonna copy bob and call it a day.

Robert_K

iTrader: (25)

Sell it to you cheap.

03threefiftyz

iTrader: (25)

315 on an 11" wide wheel and 12"...

Robert_K

iTrader: (25)

That will work in this thread.

2004Black350z

iTrader: (37)

Nothing that big but ill be joining the club again. 3rd time. Nothing as big as my last 305s but 18x10s +20 265/35 285/35 Nitto nt555 being installed tomorrow

03threefiftyz

iTrader: (25)

315 is a little stretchy on the 12" even with hoosiers which run a fair bit wider than street tires.

RAntunes

Yes they look stretchy, if you are running a6's they are exactly the same size as r888's, given you are a track guy and camber is useful to you, why not 335's ? I have plenty of room in my setup but i dont want to be at -2.5 camber, i believe you have mentioned before your rears are -2.8, it would look good and the tire "bulge" would match your 315's in 11's at the front

2004Black350z

iTrader: (37)

New wheels are on 18x10 285/35. Seems rears are a little sunk. What spacer you rec? 10 or 15? Lowered on stance btw.

scotts300

iTrader: (46)

15 will be tight to rubbing unless you are rolled tightly and have some camber. I was actually going to suggest 12-13mm. I'd push those fronts out, too, maybe a 5mm slip-on spacer. Buy yourself a pair of 5mm slip-ons for the front, put them together to make 10mm to test fit the rear with the "10mm" spacer, and see if you have room for 5mm more.

03threefiftyz

iTrader: (25)

I run about -2.4 in back. 335's are more of a ***** to fit. My rears are flared, but under full compression, my guess is 335's will rub. Main reason for running 315's is that I have about 6 used sets in a storage unit along with a set of stickers. I'll probably test 335's when BFG gets around to releasing the 315. That or I will pick up some take of A6 335's to test.

Bmurray350z

iTrader: (34)

Jay I have some 5mm slip ons if you're interested

2004Black350z

iTrader: (37)

Thanks Scott for info. Brandon PM me.

Vq.turbo.DremZ

iTrader: (6)

Looks awesome, better lighting pics. Also hows the clearance with your BBK? Looking at the same wheel setup.

Skidmarkaz

So I recently purchased a 2008 Nismo 350z and I noticed that the factory Tire size looks like it is somewhat streched over the rear wheel (rays). Would there be a problem going to 255/40-18 front and 275/35-19 rear, not to mention they cost less.

KingBaby

iTrader: (3)

didn't you asked this question already under a different name?

Skidmarkaz

If you are talking about me, no.
I just created this account today.
I looked in the noob section didnt see anything about it.

KingBaby

iTrader: (3)

https://my350z.com/forum/wheels-and-...son-tires.html

Skidmarkaz

Thanks I appreciate the help.

03threefiftyz

iTrader: (25)

A pic from someone who was at our test last weekend. Monster truck status to make sure no rubbage. After getting what I needed I lowered it until it started to rub, then went back up a bit...